OTHERS_CITABLE بررسی میزان استرس شغلی و بهره‌وری کارکنان شرکت گاز استان کردستان زمینه و هدف: انسان محور و وسیله اصلی توسعه همه جانبه است و نیروی انسانی موثر، عامل اصلی تداوم، موفقیت و تحقق اهداف سازمان است. در همین راستا، محیط شغلی و سلامت سازمانی نیز از عوامل مهم و تأثیرگذار در کاهش میزان استرس در محیط کار و افزایش بهره‌وری می‌باشند. هدف این پژوهش تعیین میزان بهره‌وری و استرس شغلی در بین کارکنان شرکت گاز استان کردستان می‌باشد. روش بررسی: روش پژوهش توصیفی پیمایشی بوده و تمامی کارکنان به عنوان نمونه انتخاب شدند که در پایان تعداد 285 نفر به پرسشنامه‌ها پاسخ دادند. ابزار گردآوری اطلاعات پرسشنامه‌های استاینمتز، هلریگال و همکاران و بهره‌وری ساعتچی می‌باشد. اطلاعات جمع آوری شده با استفاده از نرم افزار SPSS مورد تحلیل قرار گرفت. یافته‌ها : بین جنسیت، وضعیت تأهل، وضعیت استخدام، شهر محل خدمت و استرس شغلی رابطه معنی داری وجود دارد اما بین وضعیت تحصیلات، سن و سابقه کاری و استرس شغلی رابطه معنی داری مشاهده نشد. بین میزان تحصیلات و شهر محل خدمت و بهره‌وری رابطه معنی داری وجود دارد و بین جنسیت، وضعیت تأهل، سن و سابقه کاری و بهره‌وری رابطه معنی داری وجود ندارد. میانگین میزان استرس شغلی کارکنان 27/118 و میانگین میزان بهره‌وری آن‌ها 89/ 66 می‌باشد. نتیجه گیری: استرس شغلی تأثیر مهمی را در کاهش بهره‌وری در محیط کار در بردارد بر همین اساس شناسایی عوامل استرس‌زای محیط و عملیاتی نمودن راهکارهای کاهش این استرس‌ها از مهم‌ترین عواملی است که در این راه می‌تواند تأثیرگذار باشد. http://ioh.iums.ac.ir/article-1-855-fa.pdf 2013-06-08 1 10 استرس، بهره‌وری، شرکت گاز A survey of Job Stress and Productivity among Kurdistan Gas Firm’s Staff   Background and aims : The study was human – oriented and means of overall development. Human force is the main factor for organization to go on, succeed and achieve goals. In line with this, work environment and organizational health are two key factors to decrease stress and increase productivity in the work environment. The purpose of this study was to determine amount of productivity and job stress between staff of gas firm in Kurdistan province.  Methods: The method was descriptive and the sample included all staff (n = 285). Data collection instrument was Stress Questionnaire by Steinmetz et al. and Productivity Questionnaire by Saatchi. Data was analyzed by SPSS software.  Results: There is a significant relationship between job stress and gender, marital status, employed status and city of workplace. However, there was no significant relationship between job stress and educational status, age and work duration. Moreover, there was significant relationship between productivity and educational status and city of workplace. But, there was no significant relationship between productivity and gender, marital status, age and work duration. The mean job stress and productivity were 118.26 and 66.88 respectively. Conclusion: Job stress adversely affects the productivity in the work environment. Identifying stress factors and implementing strategies to decrease stress are key points to this end. http://ioh.iums.ac.ir/article-1-855-en.pdf 2013-06-08 1 10 Stress Productivity Gas Company H.A Hasanzadeh Hasanzadeh.kh@gmail.com 1 AUTHOR N Shirbeigi 2 AUTHOR H Olazadeh 3 AUTHOR
OTHERS_CITABLE مطالعه غلظت و نوع الیاف آزبست با روش میکروسکوپی فاز کنتراست و الکترونی روبشی به منظور تعیین مواجهه شغلی در یک صنعت سیمان- آزبست زمینه و هدف: آزبست بطور وسیعی در تولیدات صنعتی همچون ورق‌های سیمان ‌آزبستی، لوله‌های سیمان آزبستی، کلاچ و لنت ترمز، صفحات عایق الکتریکی و گرمایی ، کانال های تهویه و غیره کاربرد دارد. مواجهه گروه‌های مختلف شغلی و غیر شغلی با این ماده سرطان‌زا و ضرورت تعیین میزان مواجهه کارگران با آزبست در صنایعی که از این ماده استفاده می کنند باعث توسعه روش‌های متنوع مطالعه غلظت الیاف هوابرد آزبست شده است. روش بررسی: در این مطالعه از فرایندهای مختلف یک کارخانه تولیدی ورق و لوله‌های سیمان ‌ آزبستی در تهران تعداد 90 نمونه بر روی فیلتر غشایی مخلوط استر سلولزی جمع‌آوری شد. مراحل آماده سازی نمونه روی نیمی از هر فیلتر مطابق روش نایوش7400 انجام شد و جهت شمارش الیاف آزبست از میکروسکوپ فازکنتراست نوری استفاده گردید. نیمه دیگر فیلتر نیز جهت تعیین عناصر تشکیل دهنده الیاف موجود در هوای محیط کار با استفاده از میکروسکوپ الکترونی روبشی مورد استفاده قرار گرفت. یافته ها: دامنه غلظت الیاف آزبست با استفاده از روش نایوش 7400، 44/0-02/0 به دست آمد. از مجموع 90 نمونه تهیه شده ، 50 درصد مقادیر بالاتر از حدود مواجهه شغلی را نشان دادند. آلوده‌ترین مکان در این صنعت سالن آسیاب ضایعات با میانگین غلظت الیاف 05/0±37/0بود و تمامی نمونه‌های این قسمت مقادیری بالاتر از حدود مجاز مواجهه شغلی را به خود اختصاص دادند. مطالعه نمونه‌ها به کمک میکروسکوپ الکترونی روبشی نیز نشان داد که نوع الیاف موجود در نمونه ها کریزوتایل می باشد. نتیجه گیری: بالاتر بودن بیش از 50 درصد نتایج شمارش الیاف آزبست از نمونه‌های جمع آوری شده در این صنعت نسبت به حدود تماس شغلی می تواند پیامد‌های ناگواری از جمله افزایش احتمال بروز بیماری‌های مرتبط با استنشاق الیاف آزبست را در آینده در پی داشته باشد. همچنین راهبرد‌های پیش‌گیرانه در مطالعات بهداشت حرفه‌ای ایجاب می‌کند که پس از گذشت 50 سال از مصرف آزبست در صنایع ایران، متخصصین کشور بتوانند هم‌زمان به چند روش ساده و دقیق در ارزیابی الیاف آزبست دسترسی داشته باشند و از این رو باید در کنار روش نایوش 7400، توسعه سایر روش های میکروسکوپی از جمله میکروسکوپ الکترونی روبشی مورد توجه قرار گیرد http://ioh.iums.ac.ir/article-1-846-fa.pdf 2013-06-08 11 17 شمارش الیاف، صنعت سیمان، آزبست، میکروسکوپ فاز کنتراست، میکروسکوپ الکترونی روبشی Investigating the Concentration and types of Asbestos Fibers using PCM and SEM in a Cement- Asbestos Industry   Background and aims : Asbestos minerals are divided into two main groups including serpentine and amphiboles and each has one or more subgroups. These minerals have been used in industrial products such as cement-asbestos sheet and pipe, brake shoe, clutch and insulation materials. Occupational and non - occupational exposures by this carcinogenic material have caused to develop several methods to evaluate airborne asbestos fibers. But in this way, NIOSH 7400 as the conventional method has some shortages that confirm necessity of studying of other microscopic methods in asbestos fibers evaluation.   Methods: In this study, 90 samples from different points of a cement- asbestos industry in Tehran (IRAN) have been collected on MCE filters. According to NIOSH 7400, half of each filter was prepared and then fiber counting was accomplished by phase contrast microscopy. The other part of filters were used for identification of asbestos fibers types by scanning electron microscopy.   Results : According to NIOSH 7400, fibers concentration range were determined 0.02 – 0.44 . The maximum concentration of airborne asbestos was 0.37±0.05 that was related to recycling process. Study of elemental composition of fibers by scanning electron microscopy confirmed that the type of fibers was chrysotile.   Conclusion: More than 50 percent of collected samples in this industry have concentrations above occupational exposure limits that may increase asbestos related diseases in the future. The preventive approaches in occupational health studies necessitate that in order to evaluate airborne asbestos fibers, the occupational hygienists need to be access to several methods. Therefore development of other microscopic methods such as scanning electron microscopy besides NIOSH 7400, must be considered. http://ioh.iums.ac.ir/article-1-846-en.pdf 2013-06-08 11 17 Asbestos Fibers Cement – Asbestos industry Phase contrast microscopy Scanning electron microscopy H Marioryad 1 AUTHOR H Kakooei kakooei@gmail.com 2 AUTHOR
OTHERS_CITABLE بررسی وارزیابی ریسک فاکتورهای مربوط به فعالیت دستها در یک صنعت خودرو سازی در سال 1390   زمینه و هدف: اختلالات اسکلتی عضلانی ناشی از کار یکی از شایع‌تر ین مشکلات جمعیت‌های کاری در بسیاری از کشورهای در حال توسعه و به ویژه در صنایع مختلف ایران می‌باشد. از مهم‌ترین این اختلالات می‌توان به سندرم تونل کارپال ( CTS ) اشاره کرد که در بسیاری از صنایع گزارش شده است و درمیان کارگران صنایع خودروسازی بیشتر شایان توجه می‌باشد. هدف از انجام این پ‍ژوهش بررسی و ارزیابی ریسک فاکتورهای مربوط به فعالیت دست‌ها و اثر تلفیقی ریسک فاکتورها در به وجود آوردن عوارض اسکلتی عضلانی اندام‌های فوقانی می‌باشد که به این منظور از روش حد آستانه مجاز سطح فعالیت دست‌ها ( HAL_TLV ) استفاده شد.   روش بررسی: این مطالعه از نوع مقطعی به روش توصیفی-تحلیلی می‌باشد که در آن 44 نفر مرد در دو سالن پرس ضربه ای و پرس هیدرولیکی کارخانه خودروسازی مورد بررسی و ارزیابی قرار گرفتند. نمونه گیری از طریق سرشماری انجام گرفت. اطلاعات از طریق مشاهده ای وبا استفاده از چک لیست‌های مربوط به میزان فعالیت دست‌ها ( HAL ) و حداکثر نیروی طبیعی ( NPF ) جمع آوری گردید. نتایج حاصل از تلفیق این دو متغیر در جدول HAL_TLV برای تخمین سطوح ریسک شغل‌های مورد نظر انجام مورد استفاده قرار گرفته است. آنالیز و تجزیه تحلیل داده‌ها ا با استفاده از نرم افزار SPSS 18 و رسم نمودارها توسط نرم افزار EXELL انجام شد. روش بررسی: این مطالعه از نوع مقطعی به روش توصیفی-تحلیلی می‌باشد که در آن 44 نفر مرد در دو سالن پرس ضربه ای و پرس هیدرولیکی کارخانه خودروسازی مورد بررسی و ارزیابی قرار گرفتند. نمونه گیری از طریق سرشماری انجام گرفت. اطلاعات از طریق مشاهده ای و با استفاده از چک لیست‌های مربوط به میزان فعالیت دست‌ها ( HAL ) و حداکثر نیروی طبیعی ( NPF ) جمع آوری گردید.نتایج حاصل از تلفیق این دو متغیر در جدول HAL_TLV برای تخمین سطوح ریسک شغل‌های مورد نظر انجام مورد استفاده قرار گرفته است. آنالیز و تجزیه تحلیل داده‌ها ا با استفاده از نرم افزار SPSS 18 و رسم نمودارها توسط نرم افزار EXELL انجام شد.   یافته ها: نتایج تحقیق نشان می­دهدکه در سالن پرس ضربه ای 31.25%(5نفر)درسطح ریسک A (ناحیه ایمن)و73.3%(11نفر)درسطح ریسک B (منطفه احتیاط)قرار گرفتند.همچنین درسالن پرس هیدرولیکی (مجموع هردرگروه)3.57%(1نفر)درسطح ریسک A (ناحیه ایمن)و96.4%(27نفر)درسطح ریسک C (ناحیه خطرناک)قرار گرفتند. بررسی و آنالیز نتایج نشان می­دهد که درقسمت پرس ضربه­ای ارتباط معناداری به صورت معکوس بین 2 متغیر HAL و NPF بدست آمد( r=0/881 و p<0.014 )همچنین در 2 گروه شاغل درسالن پرس هیدرولیکی نیزارتباط معناداری به صورت معکوس بین این 2 متغیر به دست آمد.گروه اول( p<0.001 و r=0/881 )وگروه دوم ( p<0.004 و r=0/68 ).   تیجه گیری: ارزیابی فاکتورهای ریسک ارگونومیکی 2 سالن پرس هیدرولیکی و پرس ضربه ای نشان می‌دهد که پرس هیدرولیکی نسبت به پرس ضربه ای دارای بیشترین ریسک سطح c (خطرناک) می‌باشد و عامل ایجادکننده آن‌را می‌توان ناشی از اعمال نیروی زیاد به همراه انجام حرکات تکراری با سرعت بالا در این سالن عنوان کرد. همچنین می‌توان استنباط نمود در مشاغلی که افراد مجبور به اعمال نیروی زیاد هستند، با کاهش سرعت و تکرار حرکات، ریسک ابتلا به اختلالات اسکلتی – عضلانی اندام‌های فوقانی به خصوص CTS کاهش خواهد یافت و به طور کلی می‌توان گفت ایجاد تعامل در اعمال نیرو، تکرار حرکات و مدت فعالیت می‌تواند در پیشگیری از ابتلا به اختلالات اسکلتی-عضلانی بسیار سودمند باشد.   http://ioh.iums.ac.ir/article-1-856-fa.pdf 2012-11-15 18 26 ریسک فاکتور ارگونومی، اختلالات اسکلتی –عضلانی اندامهای فوقانی، سندرم تونل کارپال(CTS)،روش HAL_TLV،میزان فعالیت دستها(HAL)حداکثرنیروی هنجار(NPF) The Risk Assessment of Related Factors of Hand Activities in Automotive Industry   Background and aims: Work-related musculoskeletal disorders (WMSDs) are the most prevalence problems of working populations in many developing countries and specifically in Iran. One of the most important disorders is Carpal Tunnel Syndrome (CTS) which has been reported in many industries, especially in workers of automotive companies. The aim of this study is the risk assessment of related factors of hand activity and combined effect of risk factors in occurring upper extremity musculoskeletal disorders (UEMSDs). In order to evaluate risk assessment the threshold of hand activity level technique (HAL_TLV) is used.   Methods: The sectional descriptive-analytical method was used in this study. In this method 44 workman in the impulse and hydraulic press salons of automotive company was selected randomly, in addition sampling was carried out by censuses report. Data was collected through checklists of hand activity level (HAL) and normalized peak force (NPF) and also site observation. The results of combination of these variables were put in HAL_TLV graph, in order to evaluate the risk level of mentioned tasks. Data analyzing was done using SPSS18.   Results: The Results shows that 31.25% (5 workman) was at risk level A (low risk) and 73.3% (11 workman) was at risk level B (moderate risk) in the impulse press salon and in the hydraulic press salon 3.57%(1 workman) and 96.4% (27 workman) of each group was at risk level A (low risk) and risk level C (high risk), respectively .The analysis of results indicates that there are reverse significant relationship between HAL and NPF in the salon of impulse press (p<0.014,r=0.881). Moreover the same result was obtained for two workman groups of the hydraulic press salon, as r=0.881, p<0.001 for group 1 and r=0.68, p<0.004 for group 2.   Conclusion : The ergonomic risk assessment of hydraulic and impulse press salons shows hydraulic press compare to impulse press has the highest risk as level C (high risk) which may caused by excessive force with rapid and repetitive movements at this salon. Therefore it can be said, in occupations that workers must have set excessive force, the risk of upper extremity musculoskeletal disorders (UEMSDs) especially CTS may decrease via reducing the speed and repetition of movements. Finally the interaction between force, time and movement repetition may prevent musculoskeletal disorders. http://ioh.iums.ac.ir/article-1-856-en.pdf 2012-11-15 18 26 Ergonomic Risk Factors Upper Extremity Musculoskeletal Disorders (UEMSDs) HAL-TLV Technique Hand Activity Level (HAL) Normalized Peak Force (NPF) R yarahmadi r-yarahmadi@tums.ac.ir 1 AUTHOR M Jalali 2 AUTHOR
OTHERS_CITABLE مداخلات ارگونومی کلان و تاثیر آن بر بهره وری و کاهش ضایعات اسکلتی- عضلانی   زمینه و هدف: نتایج بررسی­ها نشان می ­ دهد که در کشور ما به مباحث تئوری و کاربردی ارگونومی توجه جدی و قابل قبول نشده است. لذا هدف از انجام این پژوهش ارایه الگویی است که بتوان با بکارگیری ارگونومی بهره­وری را افزایش و ریسک­فاکتورهای ارگونومیکی را در سیستم­های اجتماعی- فنی کاهش داد.   روش بررسی: در این پژوهش یک مدل تئوری برای هدایت و راهنمایی« فرآیندهای مداخلات ارگونومی» و ارزیابی آن ارایه گردید و در یک مجموعه آموزشی( EO ) به کار برده شد. جامعه آماری پژوهش کلیه کارکنان و اعضای هیئت علمی می­باشند. نمونه­گیری به صورت تصادفی ساده انجام شد. ابزار سنجش ضایعات اسکلتی- عضلانی در دو جامعه شاهد و نمونه " پرسش­نامه نگاشت بدن" می­باشد. برای تجزیه و تحلیل مقایسه­ای داده­های آماری به­دست آمده؛ از اعداد فازی و سطح محصور اعداد فازی استفاده گردید.   یافته­ها: بررسی مقایسه­ای دستاوردهای مداخله ارگونومی؛ نسبت به سال پایه؛ نشان­دهنده توسعه فعالیت­ها، کاهش هزینه­ها و افزایش درآمد و گسترش کار با نیروی انسانی کمتر می­باشد. تجزیه و تحلیل داده­های« پرسش­نامه نگاشت بدن» با نگرش فازی نشان می­دهد که سطح محصور اعداد فازی متعلق به درجه ابعاد کیفیتی ناراحتی جامعه­ای که در آن مداخله ارگونومی انجام شده کمتر از جامعه شاهد است.   نتیجه­گیری: نتایج حاصل از ارزیابی مداخلات ارگونومی خرد و کلان( ارگونومی جامع) در این پژوهش نشاندهنده اثرات مثبت به کارگیری این دانش در افزایش نوآوری و انگیزه کارکنان در حل مشکلات نسبت به سال پایه می­باشد. کارآیی اکثر واحدها در EO ؛ به علت کاهش ضایعات اسکلتی- عضلانی و فعالیت­های کارگروه­ها و اجرای عوامل ارگونومیکی؛ بهبود پیدا کرده است.   http://ioh.iums.ac.ir/article-1-854-fa.pdf 2012-11-15 27 39 ارگونومی کلان، ارگونومی خرد، بهره وری، ضایعات اسکلتی- عضلانی، منطق فازی Macro Ergonomics Interventions and their Impact on Productivity and Reduction of Musculoskeletal disorders: Including a Case Study   Background and aims : The present studies show that the theoretical discussions and the applications of ergonomics have not been seriously handled in our country, Iran. So, the aim of the current study was to present an appropriate method which could help in increasing the productivity and decreasing the risk factors of ergonomics in socio-technical systems.   Methods: During the present study, a theoretical model was developed to guide the “ergonomic intervention processes” and its evaluation and application was carried out for an educational organization (EO). The faculty members were selected as the subjects of statistical survey and simple random sampling was performed. The level of musculoskeletal disorders was evaluated in control and treatment groups. Comparative analysis of the obtained data was carried out using fuzzy numbers and their level of confinement.   Results: According to the results of present study with the help of ergonomic interventions, an increase in the activity of staff members, increased revenue, expansion of work with the least number of manpower and a decrease in the overall expenses was seen as compared to the base year. In addition, the analysis of questionnaires with fuzzy approach has shown that the level of musculoskeletal disorders in the experimental group was less as compared to that of control group.   Conclusion: The results obtained by the use of macro and micro ergonomic interventions (Total ergonomics) have proved that these methods were successful by increasing the innovation and motivation of the staff members to solve the organizational problems as compared to the base year. The decrease of musculoskeletal disorders among the members resulted to an increase of performance in different units of the educational organization.   http://ioh.iums.ac.ir/article-1-854-en.pdf 2012-11-15 27 39 Macro ergonomics Micro ergonomics Productivity Musculoskeletal disorders Fuzzy logics N Sadra Abarqhouei nasersadra@yahoo.com 1 AUTHOR H Hosseini Nasab 2 AUTHOR M.B Fakhrzad 3 AUTHOR
OTHERS_CITABLE مطالعه تحلیلی شاخص توانایی‌کار و عوامل تعیین کننده آن در میان پرسنل   زمینه و هدف: توانایی انجام کار پایه و اساس رفاه و سلامت در زندگی همه افراد می باشد. فاکتورهای زیادی بر روی توانایی­کار اثر می گذارند مانند کار و شرایط­کار، سازمان­دهی ­کار و ویژگی­های فردی کارگر . در این مطالعه به ارزیابی شاخص توانایی­کار در میان کارگران شاغل در گروههای شغلی مختلف در یک شرکت خودروسازی و تعیین ارتباط بین شاخص توانایی­کار با ویژگی­های فردی و فاکتورهای مرتبط با سبک زندگی پرداخته شد.   روش بررسی: مطالعه حاضر از نوع توصیفی- مقطعی می­باشد. روش جمع­آوری داد­ه­ها بر اساس بازدید و تکمیل پرسشنامه شاخص توانایی کار به صورت نیمه مصاحبه­ای می باشد. جامعه مورد مطالعه شامل 271 نفر از پرسنل یک شرکت خودروسازی می باشد و گروههای شغلی مورد مطالعه نیز شامل پرسنل اداری، خدمات فنی، سالن رنگ، ساخت و مونتاژ بودند. جهت بررسی ارتباط بین شاخص توانایی­کار با ویژگیهای ­فردی­ و فاکتورهای مرتبط با سبک زندگی از آزمون­های­آماری ­آنالیز واریانس یک طرفه، تی مستقل، کروسکال والیس و همچنین برای توزیع طبقه­بندی امتیاز شاخص توانایی­کار در گروههای شغلی از آزمون آماری کای اسکوئر و در نهایت به منظور تعیین همبستگی میان امتیاز نهایی شاخص توانایی­کار با هر یک از ابعاد پرسشنامه از ضریب همبستگی اسپیرمن استفاده گردید.   یافته­ها: میانگین شاخص توانایی­کار در مطالعه حاضر 67/37 با انحراف معیار 87/5 محاسبه گردید . همچنین توزیع طبقه­بندی شاخص توانایی­کار بدین صورت بود که 4/7% در رده (ضعیف)، 16/36% در رده (متوسط)، 75/38% در رده (خوب) و 71/17% در رده (عالی) قرار گرفتند. با افزایش سن، توانایی­کار کاهش معناداری از خود نشان داد(001/0 >P  ).  همچنین افرادی­که از سطح تحصیلات بالاتری برخوردار بودند امتیاز شاخص توانایی­کار بهتری داشتند. بین فاکتورهای مرتبط با سبک زندگی (چاقی، مصرف سیگار، ورزش) و شاخص توانایی­کار ارتباط معنی­داری یافت شد(001/0 >P  ). همچنین بین داشتن سابقه­کاری بالاتر، ماهیت فیزیکی شغل و شاخص توانایی­کاری پایین ارتباط معنی­دار وجود داشت(001/0 >P  ).   بحث و نتیجه گیری: با توجه به نتایج حاصله و بر اساس معیار موسسه بهداشت شغلی کشور فنلاند توانایی­کار در مطالعه حاضر در سطح خوب (43-37) قرار می­گیرد، اما با توجه به میانگین سنی جمعیت مورد مطالعه (35سال) میانگین امتیاز شاخص توانایی­کار مطلوب نمی­باشد. ویژگیهای فردی مانند سن و فاکتورهای مرتبط با سبک زندگی از عوامل تاثیرگذار بر توانایی­کار هستند. لذا پیشنهاد می­شود که برنامه­های پیشگیری کننده مرتبط با بهبود سبک زندگی به منظور افزایش توانایی­کار مورد توجه قرار بگیرد که از جمله این موارد می توان به برقراری فعالیت­های مستمر ورزشی در کارخانه، عدم مصرف سیگار و برقراری ­رژیم غذایی مناسب جهت برخورداری از وزن ایده­آل اشاره کرد. ضمن اینکه توجه به وضعیت سلامتی و ظرفیت­های عملکردی پرسنل باید در اولویت برنامه­های حفظ و ارتقاء توانایی­کار قرار بگیرد.   http://ioh.iums.ac.ir/article-1-857-fa.pdf 2012-11-15 40 49 توانایی کار، شاخص توانایی کار، ویژگی های فردی، فاکتورهای مرتبط با سبک زندگی، خودروسازی Analytical evaluation of work ability index and its determining factors among workers of a car manufacturing industry   Background and aims : The ability of work is the basis of well-being for all of us. Many factors affect the work ability such as work and work condition, work organization and human resource. The aim of this study was to assess the work ability among car manufacturing workers and determine the relationship between the work ability index with individual characteristics and life style factors.   Methods : The study was a descriptive cross-sectional investigation. The subjects comprised of 271 workers­ with mean age of 35 years who occupied by a car manufacturing Company. They completed the Work Ability Index Questionnaire during semi interview sessions. The job groups of Painting Shop, assembling line, office department, and technical section were studied. Statistical tests including one-way­ ANOVA, t-test, Kruskal wallis were used for analyzing the relationship between work ability index and individual characteristic as well as life style factors. To test the distribution of work ability index score categories, a chi-square test was used and finally, Spearman correlation coefficient was used in order to determine correlation between the final of work ability index score with any of questionnaire items.   Results : The mean value of work ability index in this study was (37.67) with SD=5.87. The WAI categories were 17.71% in "excellent", 38.75% in "good", 36.16% in "moderate", and 7.4% in "poor" levels. Association between life style factors (obesity, smoking, exercise) and WAI was statistically significant (P< .0.001 ). Lower WAI was associated with increasing the age, high work experience and lower education (P<.0.001). Meanwhile, physical demand of the jobs was strongly associated with the WAI score (P<.0.001). Conclusion : On the basis of Finnish Institute of Occupational Health, the value of work ability in current study was in good category(37-43) but, concerning the mean age (35 years) of the studied population the mean value of work ability is not appropriate. Individual characteristics, such as age and life style, are most effective factors on work abilities of the employees. Therefore, preventive programs relating to the work conditions as well as life style should be considered for improving the work ability. Some of these actions are establishing effective ergonomics evaluation and intervention programs, decreasing smoking rate, proposing appropriate diets to maintain ideal weight and functional capacity of the workers. http://ioh.iums.ac.ir/article-1-857-en.pdf 2012-11-15 40 49 Work Ability Work Ability Index Individual characteristics life style factors M Eyvazlou 1 AUTHOR A Mazloumi amazlomi@tums.ac.ir 2 AUTHOR A.A Farshad 3 AUTHOR F Hoseini 4 AUTHOR
OTHERS_CITABLE بررسی تاثیر آموزش بهداشت براساس الگوی بزنف براستفاده از وسایل حفاظت فردی تنفسی در کارگران کارخانه کربن بلاک اهواز در سال 1387   زمینه و هدف : بیماری­های تنفسی ناشی از کار با بروز سالانه 50 میلیون یک سوم تمامی بیماری­های شغلی را شامل می­گردند و یکی از مهم­ترین علل غیبت کارگران از کار می­باشند. برخی از بیماری ‌ های شغلی را می­توان با وسایل حفاظت فردی پیشگیری کرد . یکی از الگوهای موثر در آموزش بهداشت و خصوصا آموزش ایمنی به کارگران الگوی بزنف است. هدف مطالعه تعیین تاثیرآموزش براساس این الگو بر افزایش رفتار استفاده از وسایل حفاظت فردی تنفسی در کارگران کارخانه کربن بلاک که آلاینده­های زیادی از جمله دوده دارد است.     روش بررسی : در این مطالعه نیمه­تجربی که روی 100 نفر از کارگران کارخانه کربن بلاک اهواز در دو گروه آزمون و کنترل 50 نفری انجام شد،وسیله گردآوری اطلاعات پرسشنامه و چک لیست بود.مداخله به صورت برنامه آموزشی طراحی شده براساس الگوی بزنف روی کارگران گروه ازمون انجام گرفت. داده ها قبل و پس از آزمون با استفاده از پرسشنامه و چک لیست جمع آوری ،تجزیه و تحلیل ومقایسه شد. برای تجزیه و تحلیل داده ها از نرم افزار SPSS16 وآزمون های T مستقل ، مجذور کا و آزمون ضریب همبستگی پیرسون استفاده شد.   یافته ها : بعداز مداخله آموزشی، میانگین نمره آگاهی، نگرش،قصد،عوامل قادرسازی و عملکرد گروه آزمون در مقایسه با گروه کنترل افزایش معنی داری نشان داد( p<0/00001 )اما بین میانگین نمره هنجارهای انتزاعی در دو گروه آزمون و کنترل اختلاف معنی­داری مشاهده نشد.   نتیجه­گیری : مداخله آموزشی براساس الگوی بزنف، استفاده از وسایل حفاظت فردی تنفسی را در کارگران افزایش می دهد.   http://ioh.iums.ac.ir/article-1-845-fa.pdf 2013-06-08 50 58 الگوی بزنف، وسایل حفاظت تنفسی، آموزش Effect of health education based on BASNEF pattern on use of personal protective respiratory equipment in Ahvaz carbon block factory workers, 2009   Background and aims: Respiratory diseases due to work with 50 million annually incidence included one third of all occupational diseases and it is one of the main causes of absenteeism from work in workers. Some occupational diseases can be prevented with personal protective equipment. BASNEF model is one of the effective health education and safety training models for workers. The aim of this study was to determine the effect of educational intervention based on BASNEF pattern on increasing the use of personal protective respiratory equipment among carbon black factory workers , where many air pollutants such as carbon block exists. Methods: In this study the intervention curriculum based on BASNEF pattern administrated on 100 (experimental and control) Ahvaz carbon block factory workers. Data were collected by questionnaires. The data were analyzed by Independent T, χ square and Pearson correlation co- efficient using SPSS version16.   Results : After the intervention, the mean scores of knowledge, attitude, intention, and enabling factors showed significant increase in experimental group in comparison of control group (p<0.00001). In addition, the mean score of subjective norms in experimental and control groups showed no significant differences. Conclusion: The educational program based on BASNEF pattern was effective in improving the use of respiratory personal protective equipment in Ahvaz carbon block factory workers  http://ioh.iums.ac.ir/article-1-845-en.pdf 2013-06-08 50 58 BASNEF pattern respiratory protection equipment education M Solhi m-solhi@tums.ac.ir 1 AUTHOR M Saki 2 AUTHOR I Alimohammadi 3 AUTHOR H Haghani 4 AUTHOR
OTHERS_CITABLE ارزیابی ارگونومیک طرح جدید پوست کن دستی بر اساس روش الکترومیوگرافی   زمینه و هدف: ابزارهای دستی طیف وسیعی از محصولاتی را شامل می‌شوند که تطابق آن‌ها با ساختار فیزیکی و آناتومی دست در ایمنی و سلامتی تأثیر گذار می‌باشند. پژوهش حاضر طرح جدیدی از پوست کن مورد استفاده در آشپزخانه را ارائه می‌کند تا ویژگی‌هایی از جمله حفظ حالت طبیعی مچ، تقلیل میزان فشار و در نهایت کاهش فعالیت عضلات را با خود به همراه داشته باشد.     روش بررسی: هفتاد آزمایش با شرکت ده داوطلب زن با بکارگیری شش مدل از پوست کن به همراه یک مدل طراحی شده به انجام رسید. الکترومیوگرافی سطحی عضلات دو سر بازو، سه سر بازو و خم کننده سطحی انگشتان دست راست از شروع تا پایان آزمایش ثبت گردید. فعالیت الکترومیوگرافی 80% حداکثر نیروی ارادی هر عضله ثبت و اندازه گیری شد و جهت نرمال سازی داده های الکترومیوگرافی هنگام تحلیل داده های آزمایش اصلی، مورد استفاده قرار گرفت.     یافته‌ها: بر اساس نتایج الکترومیوگرافی، میانگین فعالیت عضلات دو سر و سه سر بازو در پوست کن طراحی شده، کمترین مقدار را به خود اختصاص داد. تفاوت‌های مشاهده شده بین فعالیت EMG عضلات سه سر بازو و خم کننده انگشتان و به طور کلی در مجموع عضلات یاد شده، در هفت پوست کن مورد بررسی، معنی دار نشان داده شد.   نتیجه گیری: با استفاده از شاخص‌های الکترومیوگرافی می‌توان به خوبی کارکرد مدل‌های مختلف یک محصول را ارزیابی کرد. تفاوت در میانگین فعالیت عضلات دلالت بر تأثیرگذاری شکل، فرم و نوع پوست کن در تعامل با دست دارد. در استفاده از پوست کن ضمن وارد شدن بیشترین نیرو بر انگشتان، انتقال نیرو، وظیفه نگهداری و چنگش نیز به عهده انگشتان می‌باشد، لذا ملاحظات ارگونومی در طراحی پوست کن می‌تواند در میزان فعالیت عضلات مرتبط با انگشتان تأثیرگذار باشد. نتیجه پژوهش حاضر با تحقیقات مشابه در مطالعات پیشین تطابق دارد.   http://ioh.iums.ac.ir/article-1-853-fa.pdf 2013-06-08 59 67 ابزار دستی، پوست کن خانگی، الکترومیوگرافی، ارگونومی، فعالیت عضله، چنگش Ergonomics evaluation of new home stripper using electromyography   Background and aims : In our daily lives hand tools are often used in many work situations. With respect to design characteristics, hand tools can be considered a risk factor when a high level of repetition are required or when awkward postures are adopted. Therefore attention to ergonomics design rules for hand tools is the most important factor in design process. With this in mind, the aim of the present study is to evaluate a new model of home stripper which designed based on ergonomics rules.   Methods : Ten healthy female subjects participate in this study. Seven tests were considered for each subject. The subject was instructed to strip a cucumber using six commercial models as well as with a new model , separately . The surface electromyography (EMG) signals were recorded from three muscles: biceps brachii, triceps brachii, and flexor digitorum. To make possible the comparison between models in all experiments varied between the subjects, the raw EMG signals was normalized.   Results : For biceps brachii muscle, the analysis of variance revealed that there was no significant difference on the mean EMG data among all models, however muscular activity for the new model of stripper was found lower than the other models. The results indicated that the changes among the mean EMG data of models for triceps brachii, and flexor digitorum muscle were found significant. Tukey tests shows that differences between the EMG data for the new model with one commercial model were significant.   Conclusion : A new model with commercial models of stripper was tested to evaluate the effects of design characteristics on EMG signals. The results of this study show that muscular activity is mostly related to specific design of hand tools considering form, shape and product design aspects. http://ioh.iums.ac.ir/article-1-853-en.pdf 2013-06-08 59 67 Hand tools electromyography home stripper ergonomics N Koleini Mamaghani koleini@iust.ac.ir 1 AUTHOR A.H Bakhtiary 2 AUTHOR E Sevan 3 AUTHOR H Sadeghi Naiini 4 AUTHOR
OTHERS_CITABLE بررسی عوامل مستعد کننده خشونت شغلی نسبت به دانشجویان فوریت های پزشکی   زمینه و هدف: خشونت شغلی به صورت فزاینده‌ای به عنوان یک مشکل در سیستم مراقبت های بهداشتی شناخته شده است. دانشجویان تکنسین فوریت ­ های پزشکی ممکن است در حین آموزش بالینی مورد خشونت شغلی قرار بگیرند. با این حال محققان تاکنون توجهی به این موضوع نداشتند. هدف از این تحقیق بررسی شیوع و عوامل مستعد کننده خشونت شغلی نسبت به دانشجویان فوریت های پزشکی می باشد.    روش بررسی: در این مطالعه توصیفی ، 48 دانشجوی تکنسین فوریت های پزشکی با روش سرشماری شرکت کردند. اطلاعات با استفاده از پرسشنامه‌ای که پایایی و روایی آن با روش اعتبار محتوا و آزمون - آزمون مجدد مورد تایید قرار گرفت، جمع آوری گردید.   یافته ها: به طور کلی به ترتیب 91/47 % و 08/20% از دانشجویان سابقه خشونت کلامی و فیزیکی را در حین آموزش بالینی داشتند. اکثر خشونت­های فیزیکی و کلامی توسط همراهان بیمار صورت گرفته بود. بیشترین پاسخ به خشونت کلامی و فیزیکی از جانب دانشجویان این واکنش بود که "متقابلاً داد و بیداد کردم". شایعترین عامل مساعدکننده خشونت محل کار ، تاخیر در رسیدن به محل حادثه از دید بیمار و همراه وی و کمبود آگاهی مردم در خصوص نقش تکنسین فوریت ­ های پزشکی بود.   نتیجه گیری: دانشجویان تکنسین فوریت های پزشکی اغلب در محیط کارآموزی مورد خشونت قرار می‌گیرند. باید راه ­ های پیشگیری از خشونت و همچنین نحوه واکنش به خشونت به این دانشجویان آموزش داده شود و این مباحث در سرفصل درسی آنان گنجانده شود. http://ioh.iums.ac.ir/article-1-839-fa.pdf 2013-06-08 68 75 خشونت شغلی، عوامل مستعد کننده ، دانشجوی تکنسین فوریت های پزشکی Risk factors for workplace violence in emergency medical technician students   Background and Aims: Workplace violence is increasingly recognized as a problem in the health care system. Emergency medical technician students may be exposed to violent behavior during clinical training. However, no attention has been paid by researchers to this issue. The aim of this study was to determine the prevalence and risk factors for workplace   Methods: In this descriptive study, 48 Emergency medical technician students were participated with censuses method. Data is collected using a questionnaire that its validity and reliability were tested with content validity and test-retest respectively.   Results: In total, 47.91% and 20.08% of the respondents had been verbally abused and physically assaulted during their training program, respectively. Most of physical attacks and verbal abuses were happened by patients’ families. The most common causes of workplace violence were, delay in reaching the scene from the perspective of patients and their caregivers, and lack of knowledge about the role of the Emergency medical technician students.   Conclusion: Emergency medical technician students are often exposed to violence during the course of their training programs. This group requires training on how to prevent and respond to workplace violence, and this important topic should be incorporated into their curriculum.   http://ioh.iums.ac.ir/article-1-839-en.pdf 2013-06-08 68 75 Occupational violence Risk factors Emergency medical technician students H Koohestani kohestanihamid@arakmu.ac.ir 1 AUTHOR N Bdghcheghi 2 AUTHOR K Rezaii 3 AUTHOR H.R Ebrahimi fakhar 4 AUTHOR
OTHERS_CITABLE بررسی آلودگی صوتی در راه آهن شهری و حومه تهران درسال1389     زمینه و هدف: آلودگی صوتی یکی از عوامل خطرزا در محیط زیست انسانی است که می‌تواند سلامتی روحی ، روانی و جسمی انسان را به صورت جدی به مخاطره اندازد. یکی از منابع مهم این آلودگی ، صدای ناشی از ترافیک و حمل و نقل شهری به ویژه سیستم راه آهن شهری (مترو) در محیط زیست می‌باشد . در این مقاله به بررسی و ارزیابی وضیعت صدا در کابین راهبرها و داخل واگن مسافری قطارهای متروی تهران وحومه پرداخته شده است.   روش بررسی: در این مطالعه مقطعی تراز صدا و آنالیز فرکانس صدا در قطارهای خطوط یک، دو، چهار و پنج مترو که هم اکنون از خطوط فعال در شهر تهران و حومه می‌باشند، در 354 نقطه مورد اندازه گیری و ارزیابی قرارگرفته است که 96 نقطه در داخل کابین راهبر و 258 نقطه در داخل واگن قطارها به مدت یک هفته در طی روز در دو وضعیت حرکت و توقف قطار انجام شده است. ارزیابی صدا بر اساس استاندارد هوای آزاد مصوب شورای عالی محیط زیست ایران و سازمان ACGIH انجام شد. همچنین قطارهای مترو از نظر آلودگی صوتی بر اساس نوع قطار ( TM , DC , AC ) با یکدیگر مورد مقایسه قرار گرفتند. برای اندازه ­ گیری صدا از دستگاه آنالیزور دار کالیبره شده مدل450/490 CEL– استفاده گردید و داده‌ها با استفاده از روش‌های توصیفی آماری و آزمون t و آنالیز واریانس توسط نرم افزار 18 SPSS مورد تحلیل قرار گرفت.       یافته‌ها: میانگین تراز معادل صوتی محاسبه شده داخل واگن در حین حرکت برابر dBA 9/71 که به طور معنی داری بیشتر از حد استاندارد ( dBA 65) می‌باشد (01/0> P ) . در صورتی که میانگین تراز معادل صوتی محاسبه شده داخل کابین در حین حرکت برابر dBA 3/73 که به طور معنی داری کمتر از حد استاندارد ( dBA 85) می‌باشد (01/0> P ) . بین میانگین تراز فشار صوتی (داخل واگن و کابین راهبر ) در موقعیت حرکت با توقف اختلاف معنی داری وجود دارد(01/0> P ) اما اختلاف معنی داری بین تراز فشار صوتی داخل واگن و کابین راهبرها در موقعیت حرکت وجود نداشت (5/0 p= ). در داخل واگن در فرکانس‌های مختلف اختلاف معنی داری بین متوسط تراز فشار صوتی در موقعیت حرکت و توقف وجود ندارد (5/0= P ) . اما این مطلب در مورد کابین در فرکانس‌های 500 و 250 اختلاف معنی داری بین متوسط تراز فشار صوتی در موقعیت حرکت و توقف وجود دارد (01/0> P ). قطار های نوع TM 1 و TM 2 از لحاظ متوسط تراز معادل صوتی و فشار صوتی در یک سطح (677/0= P ) و قطار های نوع AC و DC هم در یک سطح قرار دارند (5/0= P ) که به ترتیب متوسط صدا در آن‌ها برابر 5/69 و 73 می‌باشد.     نتیجه گیری: نتایج بدست آمده از این پژوهش نشان داد که میانگین تراز معادل صوتی در داخل کابین‌ها کمتر از حد مجاز اما در داخل واگن‌ها بیشتر از حد مجاز است؛ لذا اقدامات کنترلی و اصلاحی برای کاهش صدا در داخل واگن‌ها ضروری به نظر می‌رسد.   http://ioh.iums.ac.ir/article-1-852-fa.pdf 2012-11-15 76 82 آلودگی صوتی، راه آهن شهری، تهران Study of Noise Pollution in Urban and the Suburbs Railway   Background and aims: Noise pollution is one of the risk factors of the human environment that may seriously threat physical and mental health of human beings. One of the main sources of this type of pollution is the noise produced by urban transportation and traffic, particularly subway in the environment. This article aims at study and evaluation of the noise condition in drivers’ cabin and inside wagons of the subway of Tehran and the suburbs.   Methods: Noise level and noise frequency analysis in the trains of lines one, two, four and five of the subway which are among the active lines of Tehran subway and the suburbs have been measured and evaluated at 345 points within one week over two days while the train was moving and stopped of which 96 points were located inside the driver’s cabin and 258 points were in wagons. Noise was evaluated based on Free Air Standard approved by the Environment Higher Council of Iran and ACGIH Organization. The subway trains were also compared regarding noise pollution based on type of the train (TM, DC, AC ). Calibrated analyzer instrument, model CEL-450/490 was used to measure noise and the data were analyzed by statistical descriptive methods, t-test and analysis of variance by SPSS18 software.   Results: Mean equivalent noise level measured in the moving wagon was equal to 71.9 dBA that is significantly higher than the standard level (65 dBA) ( P<0.01). In case the mean equivalent noise level measured in the moving cabin is equal to 73.3 dBA, that is significantly less than the standard level (85 dBA) (P<0.01). There is a significant difference between mean noise pressure level in wagon and in driver’s cabin while moving and stoppage (P<0.01). However, there is no significant difference between noise pressure level in the wagon and driver’s cabin while moving (p=0.5). There is no significant difference between the mean noise pressure level while moving and stoppage in different frequencies inside the wagon (p=0.5). However, there is a significant difference between the mean noise pressure level while moving and stoppage in 250 and 500 frequencies in the cabin (P<0.01). TM1 and TM2 trains are in the same class considering mean noise equal level and noise pressure (P=0.667) and AC and DC trains are in the same class (P=0.5) and their mean noise is equal to 69.5 and 73, respectively.   Conclusion: The results obtained in this research showed that the mean equivalent noise level in the cabins is less than the authorized limit however, it is higher than the authorized limit in the wagon. Therefore, it seems necessary to take control and prevention measures for noise reduction inside wagons.   http://ioh.iums.ac.ir/article-1-852-en.pdf 2012-11-15 76 82 Noise pollution urban railway Tehran M Hamidi man.hamidi@yahoo.com 1 AUTHOR A Kavousi 2 AUTHOR P Nasiri 3 AUTHOR A Hamedani 4 AUTHOR S Kiani 5 AUTHOR H.R Dehghan 6 AUTHOR
OTHERS_CITABLE ارزیابی راحتی سه نوع پیچ گوشتی موجود در بازار ایران زمینه و هدف: امروزه محصولات باید علاوه بر ایمن بودن دارای کاربری آسان نیز باشند. راحتی نقش مهمی در استفاده از ابزارهای دستی ایفا می‌کند و رابطه بسیار قوی بین ارگونومی و راحتی وجود دارد و بسیاری از تولید کنندگان ابزار، از اصول ارگونومی در جهت تولید محصول راحت‌تر استفاده می‌نمایند. از آنجا که پیچ گوشتی به صورت گسترده در هر جامعه ای بکار می‌رود هدف از این مطالعه، ارزیابی راحتی انواع رایج آن در بازار ایران، برای کاربران این ابزار می‌باشد. روش بررسی: 22 نفر در شرایط مشابه و استاندارد از سه نوع پیچ گوشتی رایج در بازار ایران (ایرانی، ژاپنی و چینی) استفاده نمودند. در روند آزمایش 12 پیچ در امتداد افقی و 12 پیچ در امتداد عمودی، با هر یک از انواع فوق، پیچانده شد. سپس ارزیابی ناراحتی وضعیتی موضعی (LPD ) انجام گردید. یافته ها: 36/84% کاربران نوع ایرانی و 64/13% نوع ژاپنی را راحت تلقی نمودند و هیچ‌یک نوع چینی را از نظر کاربری راحت تعریف ننمودند. آزمون LPD میانگین ناراحتی حاصله از کاربری پیچ گوشتی نوع ایرانی 56/2، نوع ژاپنی 71/2 و نوع چینی 73/2 می‌باشد که با توصیف راحتی توسط کاربران نیز مطابقت دارد و مطابق آزمون فیشر ( 05/0< p)اختلاف LPD سه نوع پیچ گوشتی معنا دار نیست. نتیجه گیری: علیرغم عدم تفاوت معنی دار از نظر آماری بین سه نوع پیچ گوشتی، پیچ گوشتی نوع ایرانی از نظر کاربران با LPD کمتر، راحتی بیشتری را تأمین می‌نماید. توصیه می‌شود با پژوهش‌های بیشتر، این ابزار بر مبنای اصول ارگونومی طراحی شود. http://ioh.iums.ac.ir/article-1-851-fa.pdf 2012-11-15 83 88 پیچ گوشتی، ناراحتی وضعیتی موضعی Comfort evaluation of three types of screwdrivers in the Iranian market Background and aims: Nodaways, products have to be used easily and safely. Comfort plays an important role in hand tools and there is a significant relationship between Ergonomic and convenient. Therefore, many hand tool manufacturers implement the fundamentals of Ergonomics in order to produce more convenient instruments. As the screwdriver has been widely used in each society, the goal of this research was to evaluate the screwdriver’s comfort in the Iranian market.    methods: Three types of screwdrivers currently existed in the Iranian market and were made in Iran, China, and Japan were used by 22 people at the same conditions and based on the standard manner. 12 screws were screwed both horizontally and vertically for all three types separately during the testing procedure. Afterward, the evaluation of Local Posture Discomfort (LPD) was performed.    Results: While 84.36 % of the Iranian type and 13.64 of the Japanese type are accepted as comfortable tools by the operators, nobody considered the Chinese type as a comfortable tool. The average of discomfort at the yielded LPD test was 2.56, 2.71, and 2.73 for Iranian, Japanese, and Chinese type respectively. These results are related to the description of users from comfort. Based on the Fisher test (p<0.05) there was no significant difference in LPD of screwdrivers.    Conclusions: According to the tested users, the Iranian Screwdriver with the lower LPD is able to provide more confidence and it is recommended to design this instrument based on more research and Ergonomics criteria. http://ioh.iums.ac.ir/article-1-851-en.pdf 2012-11-15 83 88 Screwdrivers Local Posture Discomfort(LPD) M.A Mououdi Mououdi2006@yahoo.com 1 AUTHOR S.M.H Taher 2 AUTHOR