OTHERS_CITABLE اتاقک سازی به منظور کنترل صدای دستگاه دمنده هوا در یک صنعت فولاد زمینه و هدف: درصنعت فولاد دمنده‌های هوا که جهت تامین هوای فشرده مورد استفاده قرار می‎گیرند یکی از منابع صوتی آزاردهنده محسوب می شوند. هدف این مطالعه اتاقک‎سازی به منظور کنترل صدای دستگاه دمنده هوا در یک صنعت فولاد بود. روش بررسی: اندازه‎گیری تراز صدا همراه با تجزیه فرکانسی آن با استفاده از ترازسنج مدلCASELLA-Cell.450، صورت گرفت. دزیمتری به منظور برآورد میزان مواجهه کارگران با استفاده از دزیمتر مدلTES-1345 انجام گردید. برآورد تراز توان صوت دستگاه در شبکه Lin بر اساس ایزو 3746 انجام گردید.توزیع تراز صدای انتشار یافته از منبع بصورت نقشه صوتی با استفاده از نرم افزار Surfer تهیه گردید. تحلیل آکوستیکی محیط بر مبنای ویژگی‎های جذب صوتی سطوح صورت گرفت. در نهایت به منظور کنترل صدا یک اتاقک با دیواره فشرده ساندویچی برای دمنده طراحی و میزان تاثیر مداخله برآورد گردید. یافته‎ها: نتایج نشان داد تراز کلی فشار صوت دمنده dB(Lin)4/95 و فرکانس غالب آن Hz2000 در شبکه خطی Lin است. علاوه بر این تراز توان صوت دستگاه دمنده در فرکانس غالبdB 9/102 تعیین گردید. میزان سطح جذب موثر صوتی سطوح داخلی سالن مذکوربرابر با 082/0 و میانگین میزان مواجهه شغلی با صدا بر مبنای دز صدای دریافتی معادل 230درصد تعیین گردید. با طراحی اتاقک با لایه عایق اصلی از نوع ورق فولادی و لایه پشم شیشه و ورق پانچ به عنوان جاذب در سطح داخلی دیواره آن، افت انتقال عملی صوت در فرکانس غالب با در نظر گرفتن 001/0 نشتی در حدود dB30 برآورد گردید. نتیجه‎گیری: عامل اصلی ایجاد صدا در دستگاه دمنده هوا گیربکس و کمپرسور بوده که به دلیل عملکرد روتور و چرخ دنده‌های مارپیچی در قسمت گیربکس و ایجاد فعل و انفعال بین جریان حرکت هوا در طول پره‎های دوار و ثابت در داخل کمپرسور ایجاد می‎گردد، که با طراحی اتاقک میزان دز صدای دریافتی کارگران به کمتر از 20 درصد کاهش می‎یابد. کلید واژه‌ها: اتاقک سازی، دمنده هوا، کنترل صدا، تحلیل آکوستیکی، صنعت فولاد http://ioh.iums.ac.ir/article-1-926-fa.pdf 2014-08-22 1 12 اتاقک سازی دمنده هوا کنترل صدا تحلیل آکوستیکی صنعت فولاد Enclosure design fornoise control of air blowerin a typical steel industry   Background and aims: In the steel industry, air blowers used to supply compressed air are considered as sources of annoying noise . This study aims to design an acoustic room chamber in order to control the noise level of the air blower.   Methods: Measuring of the noise level along with frequency analysis was performed by using sound level meter, model ofCASELLA-Cell.450 . Dosimetery was performed in order to assess the worker’s exposure using the dosimeter model TES-1345. Linear sound power level of machine was calculated based on ISO-3746. Distribution of noise emission of the source was shown in form of workroom noise maps using Surfer software. Acoustic analysis of workroom was performed based on sound absorption characteristic of internal surfaces. In order tocontrol noise level, an enclosure along with condensed sandwich panels was designed for blower and finally, the effect of this intervention was estimated.   Results: The results showed that the total sound pressure level of the air blower was 95.4dB (Lin) in which the dominant frequency was 2000 Hz. Moreover, sound power level of the air blower in the dominant frequency was 102.94dB (Lin). The effective absorption surface of workroom was estimated equal to 0.082 and the average occupational noise exposure level based on noise dose was equal to 230%.By designing the enclosure along with the steel and fiberglass as a primary insulation layer and punched steel sheet as absorption layer on internal surfaces, the actual transmission loss in the dominant frequency, by taking into account the 0.001 of leakage was estimated as 30dB.     Conclusion : gearbox and compressor weretwo main sourcesof air blower noisedue to the spiral gearing wheels spinning rotor gearbox parts and the interaction between the rotary and fixed blades and the movement of air through the compressor. Following the enclosure design,the noise dose received by worker was reduced to less than 20 percent. http://ioh.iums.ac.ir/article-1-926-en.pdf 2014-08-22 1 12 module design air blower noise control acrostic analysis steel industry. R Golmohamadi golmohammadi@umsha.ac.ir 1 Hamedan University of Medical Sciences AUTHOR M Aliabadi mohsen.aliabadi@umsha.ac.ir 2 Hamedan University of Medical Sciences AUTHOR E Darvishi darvishi.hse@gmail.com 3 Kurdistan University of Medical Sciences AUTHOR
OTHERS_CITABLE ارزیابی ریسک بهداشتی ناشی از مواجهه شغلی با موادشیمیایی خطرناک در آزمایشگاههای مراکز آموزشی درمانی دانشگاه علوم پزشکی قم   روش بررسی: روش مورد استفاده در این بررسی برگرفته از روش ارائه شده توسط وزارت منابع انسانی و دپارتمان ایمنی و سلامت شغلی مالزی است. آماده سازی ابزار جمع آوری اطلاعات، تشکیل گروه کاری، تجزیه فرآیندهای کاری، شناسایی مواد شیمیایی مورد استفاده، شناسایی مواد شیمیایی خطرناک، تعیین میزان خطر، تعیین میزانمواجهه، ارزیابی ریسک و رتبه بندی ریسک از مراحل اجرایی این روش ارزیابی بودند. از آزمونهای آماری من-ویتنی، کروسکال-والیس و کای دو برای بررسی ارتباط بین میزان ریسک با متغیرهای مستقل و همچنین از نرم افزارهای Microsoft Office – Excel 2010 و SPSS16 برای توصیف و تجزیه و تحلیل داده استفاده گردید.   یافته­ها: در این مطالعه مشخص شد که 30% از آزمایشگاه­های مورد مطالعه از مواد شیمیایی خطرناک در آزمایش­های خود استفاده نمی­کردند. همچنین ریسک 67/6% از آزمایشگاه­هادر سطح زیاد، 20% متوسط و و میزان ریسک 22/1 ± 769/1 تعیین گردید. همچنین در این بررسی مشخص شد که بیشترین ریسک مربوط به آزمایشگاه های پاتولوژی و بعلت کار با محلول فرمالدهید می باشد که در این خصوص نیاز به اجرای اقدامات کنترلی فوری است. براساس آنالیز های آماری بین ریسک و وضعیت تاهل، سابقه ی شغلی افراد، سطح تحصیلات و طی کردن دوره های آموزشی مرتبط با کار ارتباط معناداری یافت نشد (05/0< P ).   نتیجه گیری: 67/26% از آزمایشگاههای تحت مطالعه، از ریسک قابل توجهی برخوردار بودند. در راستای کنترل ریسک های تعیین شده، برنامه ها و اقدامات کنترلی براساس سلسله مراتب حذف، جایگزینی، کنترل های فنی مهندسی، کنترل های مدیریتی و بکارگیری تجهیزات حفاظت فردی توصیه می گردد. http://ioh.iums.ac.ir/article-1-941-fa.pdf 2014-08-22 13 25 ارزیابی ریسک بهداشتی مواد شیمیایی آزمایشگاه Health Risk Assessment of Occupational Exposure to Hazardous Chemicals in Laboratories of Qom University of Medical Sciences   Background and aims: Chemical materials are very useful in our lives. Laboratory technicians expose to different chemicals. Long term repeated exposures to hazardous chemicalsmay lead to chronic effects. In this research the risk of occupational exposure to hazardous chemicals in laboratories of educational and therapeutic centers of Qom University of medical sciences were assessed.   Methods: The method of this research was derived from Malaysian Department of Health and Safety. Several steps were involved in this research including preparation of data gathering tools, selection of team members, job analysis, identification of hazardous chemical materials, determination of hazard and exposure rate and risk assessment. For data analysis Excel 2010 & SPSS16 software and for determining the correlation between parameters Mann-Whitney, Kruskal - Wallis and chi square tests were used.   Results: There were no hazardous materials in 30% of laboratories. However, the risk of exposure in 6.67% of laboratories was high, in 20% was moderate and in 43.33% was low. In this study exposure to hazardous chemical materials determined 1.205±1.0047 (mean±sd), hazard rating 2.307±1.64 and risk level 1.769±1.22. Because of exposure to Formaldehyde, pathology labs were the most hazardous area. There was no significant correlation between marital status, job experience, educational level, passing work related training and risk (p>0.05).   Conclusion: Based on our results, 26.67% of laboratories had considerable risk. Therefore, in order to control such risks elimination, substitution, engineering and administrative control measures and the use of appropriate personal protective equipment are recommended.    http://ioh.iums.ac.ir/article-1-941-en.pdf 2014-08-22 13 25 Health risk assessment chemical material laboratory J Malakouti j.malakouti@yahoo.com 1 QUMS AUTHOR Sh Arsang jang 2 QUMS AUTHOR S Mosaferchi 3 QUMS AUTHOR F Hasely 4 QUMS AUTHOR F Azizi 5 QUMS AUTHOR M Mahdinia 6 QUMS AUTHOR
OTHERS_CITABLE بررسی منحنی های عملکرد ریوی در شاغلین کارخانه های تولید کننده محصولات سیمانی آزبستی  زمینه و هدف: ترکیبات آزبست یکی از خطرناک ترین آلاینده های هوا هستند که موجب بروز آزبستوزیس، سرطانهای ریه و سرطان بدخیم پرده جنب می شوند.هدف اصلی تحقیق حاضر ارزیابی اثرات مواجهه شغلی با الیاف آزبست بر عملکرد ریوی و تعیین نوع اختلال ظرفیت تنفسی در پرسنل یکی از کارخانجات لوله و صفحه سازی سیمانی-آزبستی است . روش بررسی: این مطالعه از نوع توصیفی و بطور مقطعی می باشد که 78 نفر از پرسنل یک کارخانه تولید کننده محصولات سیمانی- آزبستی در سال1389 -1388 مورد مطالعه قرار گرفتند.اطلاعات مورد نیاز از طریق تکمیل پرسشنامه تنفسی تهیه شده بر اساس منابع استاندارد توسط پرسنل در معرض مواجهه با غلظت های متفاوت الیاف آزبست جمع آوری گردید. همچنین به منظور بررسی عملکرد ریوی پرسنل تست اسپیرومتری ریوی بر طبق استاندارد انجمن متخصصین قفسه سینه آمریکا و جهت آنالیز نتایج از نرم افزار Spss و آزمون Chi-square استفاده گردید. یافته ها: افراد مورد مطالعه دارای میانگین سنی و انحراف معیار2/5 ± 05/41 سال بودند، همچنین ارتباط بین سابقه کار و اختلال در عملکرد ریوی پرسنل و اثر گذاری آزبست بر آنها در این تحقیق معنی دار با P<0/05 بوده است .نتایج اسپیرومتری در گروههای در معرض مواجهه اندک ، متوسط و زیاد نشان میدهد که72 درصد دارای عملکرد ریوی مطلوب و28 درصد پرسنل دارای عملکرد نامطلوب بوده اند. همچنین در تست تنفسی بعمل آمده اختلال ظرفیت تنفسی در به فرم الگوی تحدیدی (Restrictive Pattern) شامل شدید(2 ٪ ) ، متوسط(12 ٪) وخفیف (14٪) وجود داشت. نتیجه گیری: بر اساس نتایج بدست آمده ارتباط معنی داری بین کاهش ظرفیت های تنفسی و بروز اختلالات ریوی تحدیدی در کارگرانی که در معرض مواجهه زیاد با الیاف آزبست می باشند با افزایش سن و سابقه کار وجود داشت. بنابراین اقدامات کنترلی محیطی وفردی شامل: جایگزینی آزبست ،آموزش، به کار گیری وسایل حفاظت فردی (P.P.E) و محدود کردن زمان تماس ضروری می باشد. http://ioh.iums.ac.ir/article-1-931-fa.pdf 2014-08-22 26 34 واژگان کلیدی: مواجهه شغلی ظرفیت تنفسی الگوی تحدیدی محصولات سیمانی آزبستی Survey of pulmonary functions\' curves in Asbestos Cement production plant workers   Background and aims : Asbestos components are one of the most hazardous air pollutants that can cause a number of serious diseases in humanincluding asbestosis, lung cancer and mesothelioma . The main goal of this research was the assessment of occupational exposure effects with Asbestos fibers on pulmonary function and lung capacity disorders in worker of an Asbestos- cement pipe and plate manufacturing plant.   Methods: This research is a Cross-sectional study. In this study,78 personnelof an Asbestos- cement plant were studied during 2009-2010. Required information was collected by completing a respiratory questionnaire prepared according to standard reference personnel exposed to different concentrations of asbestos fibers. For the evaluation of pulmonary function of personnel lung spirometry was performed according to the American Thoracic Society standards and for data analysis Spss software & chi-square test were used.   Results: Subjects had the age average and SD of 41.05±5.2 .I In addition, in this study a significant association ( P<0/05) was observed between work histories and disorderof pulmonary functionand adverse effects of asbestos . Results ofspirometry in different parts with low, moderate and high exposure showed that 72% of workers had normal lung function and 28% of workers had abnormalities. Abnormalities of lung function in all studied workers were included different restrictive patterns such as severe (2%), moderate (12%) and mild (14%).   Conclusion: Based on our results, there was a significant relationship between reduction of lung capacity and restrictive lung disorders with increasing the age and work history in workerswho heavily exposed to Asbestos fibers. Therefore environmental and personal controls consisting of: replacing asbestos, training, using personal protective equipment(P.P.E) and limitation of exposure time are needed. http://ioh.iums.ac.ir/article-1-931-en.pdf 2014-08-22 26 34 Keywords: occupational exposure lung capacity restrictive pattern Asbestos cement production plant. A Zangeneh ar.zanganeh60@gmail.com 1 AUTHOR J Zangeneh zangeneh59@gmail.com 2 AUTHOR M S Sekhavatjou sekhavatjou@gmail.com 3 Department of Environmental Engineering, Khuzestan, Science and Research branch, Islamic Azad University, Ahvaz, Iran. AUTHOR A Mohammad Abbas74311@gmail.com 4 Department of Occupational health School of Health, Ahvaz Jundishapur University of Medical Sciences AUTHOR
OTHERS_CITABLE تحلیل خطرات شغلی و علل بروز آن بین کارکنان بیمارستانهای آموزشی دانشگاه علوم پزشکی قزوین زمینه و هدف: آگاهی از میزان و علل بروز خطرات شغلی می تواند در برنامه ریزی برای یافتن روش های پیشگیرانه و کاهش بروز خطرات شغلی و هزینه ها موثر باشد. هدف از این مطالعه تحلیل خطرات شغلی و علل بروز آن بین پرسنل بیمارستانهای آموزشی دانشگاه علوم پزشکی قزوین بود. روش بررسی: این مطالعه توصیفی – تحلیلی روی 258 نفر از کارکنان بیمارستان های آموزشی شهر قزوین در سال 1391 انجام شد. روش نمونه گیری طبقه ای چند مرحله ای بود. اطلاعات به کمک پرسشنامه محقق ساخته جمع آوری شد. داده ها با نرم افزار Spss با استفاده از آزمون تی تست و تحلیل واریانس یک طرفه تحلیل شد. یافته ها: بیشترین خطرات شغلی مربوط به تماس پوستی با خون یا سایر مایعات بدن و کمترین آن مربوط به مجروح شدن توسط بیمار با سایر مراجعه کنندگان بود. رابطه بین متغیر های سن، جنسیت، سابقه کار، نوع استخدام، عنوان پست ، وضعیت تاهل و بیمارستان محل خدمت با وقوع خطرات شغلی معنی دار بود(05/0>p). بین میانگین روزهای غیبت از کار و میانگین وقوع هریک از خطرات شغلی رابطه معنی داری وجود نداشت(05/0 <p).نتیجه گیری: یافته ها نشان داد که از دلایل اصلی بروز خطرات شغلی حجم زیاد کار، بی احتیاطی پرسنل، نوع شغل و ماهیت کاری کارکنان می باشد. در نتیجه بکارگیری نیرو متناسب با حجم فعالیت کارکنان، آموزش کارکنان نسبت به ویژگی های شغلی و نظارت بر رعایت احتیاط های استاندارد از سوی مسئولین می تواند باعث پیشگیری از خطرات شغلی شود. http://ioh.iums.ac.ir/article-1-1053-fa.pdf 2014-08-22 35 44 خطرات شغلی کارکنان بیمارستان The analysis of occupational Hazards and their etiology among the employees of Teaching Hospital of Qazvin University of Medical Sciences   Background and aims: The knowledge of the rate and causes of occupational hazards occurring in hospitals may be effective in formulating policy aimed at prevention as well as reducing related accidents and cost. The aim of this study was to investigate the characteristic factors responsible for the occupational hazards occurrences among the employees of teaching hospitals of Qazvin University of Medical Sciences.   Methods: This study was a descriptive analysis of 258 employees of Qazvin teaching hospitals in 2012.In this study, samples were chosen using a stratified multi- stages method. A researcher-made questionnaire was used for collection of data. The data obtained were analyzed using SPSS software and presented as count, frequency and percentages. Categorical data were analyzed using t- test as well as Anova.   Results: The highest level of occupational hazards’ occurrences was due to skin contact with blood or other body fluids while the lowest level was because of assaulting by patients or their families. There was a significant relation between the variables of age, gender, work experience, job title, and marital status as well as the hospital itself and the rate of occupational hazards. P0/05).The most important cause of occupational hazards from the employees’ point of viewwas the overload working.   Conclusion: Based on our results, it was found that the major factors influencing occupational Hazards’ development were included: overload working, personnel indiscretions as well as working condition. Therefore, increasing the number of employees proportional to the required job activities, training the employees regarding their occupational characteristics and monitoringof standard precautions are crucial factors for the prevention of occupational hazards. http://ioh.iums.ac.ir/article-1-1053-en.pdf 2014-08-22 35 44 Occupational hazards employees hospital SS Tabatabee tabatabaees1@mums.ac.ir 1 AUTHOR M Afroozi afroozi1391@gmail.com 2 AUTHOR Z Nejatzadegan z.nejat344@gmail.com 3 AUTHOR M Asadi asadimh3@mums.ac.ir 4 AUTHOR M Goharimehr m.goharimehr@gmail.com 5 AUTHOR R Kalhor r.kalhor@gmail.com 6 AUTHOR Y Faghihinia torshizi torshizi y2@gmail.com 7 AUTHOR
OTHERS_CITABLE کاربرد روش تله سوزنی (Needle Trap) در تعیین مقدار ترکیبات ارگانوهالوژن در هوا زمینه و هدف: ارزیابی صحیح مواجهه با ترکیبات آلی فرار، مهمترین گام اجرای اقدامات کنترلی برای این دسته از ترکیبات می باشد. روش نوین نمونه برداری تله سوزنی که دارای مزیت های روش های ریز استخراج در نمونه برداری از آلاینده های منتشره در هوا را می باشد، روشی ارزان و سریع است. در این مطالعه سعی شده عملکرد این روش در نمونه برداری از ترکیبات ارگانوهالوژن مورد بررسی قرار گیرد. روش بررسی: در این مطالعه، عملکرد نمونه بردار تله سوزنی (NTD) حاوی جاذب PDMS جهت نمونه برداری از چند ترکیب شاخص ارگانوهالوژن مورد بررسی قرار گرفت. تأثیر پارامترهای مختلف عملکردی در مراحل نمونه برداری (حجم گذر شکست، دما و رطوبت)، نگهداری نمونه ها (زمان نگهداری) و تجزیه (دما و زمان واجذب) مورد بررسی قرار گرفته و با روش پیشنهادی NIOSH و تکنیک SPME با جاذب مشابه مورد مقایسه قرار گرفت. یافته ها: نمونه بردار NTD دارای عملکرد بهتری در سطوح پایین دما و رطوبت بود. توانایی نگهداری آنالیت ها بعد از گذشت 3 روز از نمونه برداری بالای 95 درصد ارزیابی گردید. دما و زمان بهینه واجذب بترتیب ◦C290 و 4 دقیقه اندازه گیری شد. انحراف معیار استاندارد نسبی (RSD) جهت بررسی تکرار پذیری روش برای 5 تله سوزنی تهیه شده با ساختار مشابه و میزان جاذب یکسان 7/8-4/3 % بدست آمد. در مطالعه مقایسه ای عملکرد NTD بهتر از روش پیشنهادی NIOSH و مشابه روش SPME ارزیابی گردید. نتیجه گیری: تکنیک تله سوزنی با جاذب PDMS عملکرد خوبی در نمونه برداری از ترکیبات ارگانوهالوژن در هوا داشته و بعنوان روشی جدید جهت پایش آلاینده های هوای محیط های زیستی و شغلی توصیه می شود. http://ioh.iums.ac.ir/article-1-957-fa.pdf 2014-08-22 45 56 روش تله سوزنی ترکیبات ارگانو هالوژن نمونه برداری Application of needle trap device for determination of organohalogen compounds in the air   Background and aim s : The correct assessment of volatile organic compounds is a main stage of their control's action plan. Needle trap device (NTD) as a novel technique with all advantages of microextraction methods, is an inexpensive and rapid technique for survey of air pollution agents. In this study the performance of this technique was investigated for sampling and analysis of organohalogen compounds in the air.   Methods: The performance of NTD packed with PDMS for sampling and analysis of some of organohalogen compounds were investigated. The effects of performance parameters in three stages of sampling (BTV, temperature and RH), sampling storage (storage time) and analysis (desorption time and temperature) were investigated and compared with NIOSH proposed method and SPME with same sorbent.   Results: The NTD showed better performances in lower temperature and RH and the ability for storage of sampled analytes was more than 95% after 3 days. The optimum desorption temperature and time was 290◦C and 4 min respectively. The relative standard division for investigation of technique's repeatability for 5 NTD with same geometry was obtained 3.4-8.7%. In comparative study, the NTD showed better performances comparedto NIOSH proposed method and presented same performances compared to the SPME coated with similar coating fiber.   Conclusion: The NTD-PDMS revealed a good performance for sampling and analysis of volatile organohalogen compounds (HVOCs) in the air and we propose this method for air pollution monitoring of indoor and outdoor pollutants. http://ioh.iums.ac.ir/article-1-957-en.pdf 2014-08-22 45 56 Keywords: NTD Technique Organohalogen Compounds Sampling M Heidari heidari@gums.ac.ir 1 Guilan University of Medical Sciences AUTHOR AR Bahrami bahrami@umsha.ac.ir 2 Hamadan University of Medical Sciences AUTHOR AR Ghiasvand a_ghiasvand@yahoo.com 3 Lorestan University AUTHOR F Ghorbani Shahna fghorbani@umsha.ac.ir 4 Hamadan University of Medical Sciences AUTHOR AR Soltanian soltanian@umsha.ac.ir 5 Hamadan University of Medical Sciences AUTHOR M Rafieiemam m.rafieiemam@gmail.com 6 Department of HSE, Science & Research Branch, Islamic Azad University, Tehran, Iran AUTHOR
OTHERS_CITABLE ارزیابی ریسک حریق در ایستگاه‌های خط 1 مترو شهر تهران)پست ‌یکسوساز( با روش تجزیه و تحلیل درخت خطا  زمینه و هدف : سیستم مترو از جمله سیستم‌های زیربنایی در صنعت حمل و نقل می‌باشد که ممکن است در معرض حریق، سیل، زلزله و حوادثی مشابه قرار گرفته و سبب ایجاد خسارات و تلفات فاجعه‌بار به جامعه گردد. بنابراین مطالعه‌ای با هدف ارزیابی ریسک حریق در ایستگاه‌های خط 1 مترو شهر تهران انجام شد. روش بررسی : در اجرای این تحقیق پس از شناسایی انواع منابع ایجاد حریق در ایستگاه‌های مترو از طریق مشاهده، مصاحبه با کارشناسان مترو و بررسی مستندات با استفاده از تکنیک آنالیز درخت خطا مهم‌ترین علل بروز خطرحریق الکتریکی در پست‌های RS(Rectifier Substation) خط 1 مترو شهر تهران تعیین شد. همچنین با آنالیز کمی درخت خطا میزان احتمال وقوع خطر حریق برای یک سال محاسبه گردید. یافته‌ها :یافته‌های تحقیق نشان می‌دهد که مهم‌ترین علل وقوع خطرحریق الکتریکی در تابلوها و دستگاه‌های این پست، تعمیرات نامناسب، اجرای نادرست حین نصب تجهیزات، جریان بیش از حد، طول عمر و جنس تجهیزات است. بر اساس محاسبات انجام شده، احتمال وقوع حادثه هر 11 سال یک بار است. نتیجه‌گیری: با برگزاری دوره‌های آموزشی مناسب برای پرسنل درگیر، نظارت دقیق در حین انجام تعمیرات، و نصب تجهیزات با کیفیت بهتر، احتمال وقوع حادثه به مراتب کاهش می‌یابد. http://ioh.iums.ac.ir/article-1-924-fa.pdf 2014-08-22 57 62 ایمنی تجزیه و تحلیل درخت خطا حریق مترو تهران پست یکسوساز Fire risk assessment in Tehran metro line 1 (rectifier substation) with fault tree analysis   Background and a ims: Subway system including infrastructure systems in the transportation industry can potentially exposed to fire, flood, earthquake and similar events and could create catastrophic losses to society. Therefore, this study aims to assess the risk of fire in Tehran subway stations (line 1).   Methods: Inperforming this research, after the identifying the fire hazard resources in subway stations through observing, interviewing techniques and reviewing the documents, using fault tree analysis the causes of electrical fires in rectifier substations in line 1 of Tehran metro, was determined.Furthermore, with quantitative fault tree analysis, the probability of the fire risk was calculated per year.   Results: Our findings indicate that, main causes of electrical fires in this post are including signs and devices, improper maintenance, improper implementation during equipment installation, inappropriate quality of equipment and their aging. The probability of accidents was calculated as one accident per every 11 years.   Conclusion: Byholding training courses for personnel involved and careful monitoring during maintenance and installation of equipment, much lower probability risk would occur. http://ioh.iums.ac.ir/article-1-924-en.pdf 2014-08-22 57 62 Safety Fault Tree Analysis Fire Tehran Subway Rectifier Substation B Mortazavi mortazav@modares.ac.ir 1 Tarbiat Modares University AUTHOR S Daneshvar somayeh.daneshvar@modares.ac.ir 2 Tarbiat Modares University AUTHOR S Atr kar Roshan s.a.roshan@alzahra.ac.ir 3 Alzahra University AUTHOR
OTHERS_CITABLE ارزیابی مواجهه شغلی با سیلیس آزاد در فرآیند تخریب ساختمان در شهر تهران زمینه و هدف: واژه سیلیس آزاد به فرم کریستالیزه سیلیس و کوارتز که به عنوان فراوانترین ترکیب در پوسته زمین اطلاق می شود که می تواند باعث ایجاد سیلیکوزیس و سرطان ریه در مواجهه های با دز زیاد این ماده شود. مواجهه با سیلیس آزاد در تخریب ساختمان اجتناب ناپذیر است. و می تواند مشکلات عدیده ای برای سلامت کارگران داشته باشد. هدف از این مطالعه ارزیابی مواجهه تنفسی کارگران با سیلیس آزاد در طی تخریب ساختمانها در شهر تهران بود.   روش بررسی: در این مطالعه برای ارزیابی مواجه تنفسی کارگران با سیلیس سیلس آزاد، چهار منطقه تهران (غرب، شرق، جنوب، مرکز) انتخاب شد. نمونه برداری بوسیله پمپ نمونه برداری فردی و فیلتیرغشایی ممبران انجام گرفت. نمونه ها پس از انتقال به آزمایشگاه بوسیله طیف سنجی مرئی در طول موجهای( 820و420 نانومتر) بر اساس روش NIOSH7601 آنالیز شدند.   یافته ها: بیشترین و کمترین غلظت سیلیس به ترتیب در نواحی جنوب و مرکز تهران با میانگین هندسی 185/0 و 085/0میلی گرم بر متر مکعب بود. نتایج نشان داد که 80 در صد (48 نمونه ) از کل نمونه بالاتر از حد آستانه مجاز قرار داشتند ( ACGIH 05/0 mg/m3 ). همچنین میانگین هندسی مواجهه کارگران با سیلیس آزاد در رنج 085/0-185/0 mg/m3 قرار داشت.   نتیجه گیری : با توجه به بالا بودن مواجهه شغلی کارگران در فر آیند تخریب ساختمان در شهر تهران ( 80 درصد ) رعایت روش های کنترل و استفاده از فرآیند مرطوب و استفاده از وسایل حفاظت فردی توصیه می شود. http://ioh.iums.ac.ir/article-1-896-fa.pdf 2014-08-22 63 69 سیلیس آزاد تخریب ساختمان روش 7601 Assessment of occupational exposure to crystalline silica during demolition of buildings in Tehran.   Background and aims: The term "crystalline silica", refers to crystallized form of SiO2 and quartz, as the most abundant compound in earth crust.I It can cause silicosis and lung cancer following inhalation of large doses in course of occupational exposure. Silica exposure is unavoidable during demolition of buildings and therefore it can lead to many problems for demolition workers’ health. Theaim of this study was the assessment of workers respiratory exposure with crystalline silica during demolition of buildings in Tehran.   Methods: In this study, in order to assess the airborne crystalline silica exposure, four zones of Tehran (west ، east ، south ، center) were selected. Samples were collected on mixed cellulose filters, by using filter holder at flow rate of 2 l/min for a maximum volume of 800 liters. After transferring the samples to the laboratory, analysis of samples were performed using Visible absorption spectrometry (at 420-820nm) according to theNIOSH method No. 7601.   Results: The higher average of exposure to crystalline silica with geometric mean of 0.185 mg/m3 was related to south area, and center area with GM 0.085 mg/m3 had the lowest exposure with crystalline silica .The number of 48 samples (80%) of total samples were above the standard for crystalline silica (ACGIH 0.05mg/m3). The geometric mean of workers' exposure to crystalline silica was in the range of 0/085-0/0185 mg/m3. Conclusion:Based on the obtained results showing that the 80% of total sampleswere above the recommended threshold limit value (0.05mg/m3) and considering thehigh potential ofexposure to crystalline silica during demolition of buildings,, control of dust emission during demolition projects is required http://ioh.iums.ac.ir/article-1-896-en.pdf 2014-08-22 63 69 crystalin silica. Demolition worker.NIOSH7601 H Kakoei kakooei@gmail.com 1 Tehran University of Medical Sciences AUTHOR M Nourmohammadi normohammadim@yahoo.com 2 Tehran University of Medical Sciences AUTHOR Y Mohammadian mohammadian_yosef@yahoo.com 3 uums AUTHOR E Zarei smlzarei65@gmail.com 4 nums AUTHOR M Zokaei mzokaei2011@gmail.com 5 zabol University of Medical Sciences AUTHOR
OTHERS_CITABLE غلظت‌سازی ترکیبات آلی فرار از مایعات خالص در فاز گازی زمینه و هدف: تولید بخارات با غلظت ثابت از مایعات آلی خالص در مطالعات میدانی و آزمایشگاهی بهداشتی و سم‌شناسی و همچنین کالیبراسیون دستگاه‌های اندازه‌گیری بهداشت حرفه‌ای و محیط کاربردهای فراوانی دارد. شناخت مزایا و معایب روش‌های مختلف غلظت‌سازی می‌تواند محقق را در راه اندازی یکی از مهم‌ترین بخش‌های مطالعه که همان غلظت‌سازی است یاری نماید. در این تحقیق ضمن بررسی روش‌های مختلف غلظت‌سازی به مقایسه دو روش و شناسایی عوامل تأثیرگذار در هر یک پرداخته شده است. روش بررسی: به منظور ساخت غلظت‌های مشخص از استایرن، از دو سیستم تبخیری و تزریقی استفاده شد. در سیستم تبخیری با دمش هوا در بطری گاز شوی ml)250 )در دو حالت نازل (در فاصله نزدیک از سطح مایع و در داخل مایع) غلظت‌های مورد نظر تولید شد و در سیستم تزریقی از یک دستگاه پمپ سرنگی (3100Graseby، ساخت شرکت Smiths) استفاده شد. نتایج بدست آمده از هر دو سیستم با در نظر گرفتن عوامل تأثیرگذار در ثبات غلظت هر یک از سیستم‌ها از جمله ثبات دما، میزان جریان، تعداد منافذ و موقعیت قرار گیری نازل مورد مقایسه قرار گرفت. یافته‌ها: برای تولید غلظتppm)300 )از بخارات استایرن در رطوبت 19%، ضریب تغییرات غلظت‌های تولید شده در سیستم بابلر 86/2% و سیستم غلظت‌سازی پمپ سرنگی 01/2% محاسبه شد. زمان تقریبی ایجاد تعادل در سیستم غلظت‌سازی پمپ سرنگی در حدود 60 دقیقه بود، این در حالی است که سیستم غلظت‌سازی تبخیری در حدود 105 دقیقه به ثبت رسید. ضریب تغییرات غلظت‌های تولید شده در حالتی که نازل هوا در سطح مایع قرار دارد 52/2% و در شرایطی که نازل درون مایع قرار گیرد به 97/1% می‌باشد. نتیجه‌گیری: مهم‌ترین فاکتور در دستیابی به غلظت ثابت کنترل عوامل تأثیرگذار از جمله دما و جریان می‌باشد. پایین‌تر بودن ضریب تغییرات غلظت‌های تولید شده در سیستم پمپ‌سرنگی نشان دهنده برتری این سیستم در مقایسه با سیستم غلظت‌سازی بابلر می‌باشد که یکی از دلایل آن دلیل عدم وابستگی سیستم تزریقی به سطح مایع درون ظرف می‌باشد. http://ioh.iums.ac.ir/article-1-824-fa.pdf 2014-08-22 75 87 پمپ سرنگی ترکیبات آلی فرار دما غلظت‌سازی دینامیک غلظت‌سازی استاتیک جریان هوا میدجت ایمپینجر Vapors Generation of Volatile Organic Compounds (VOCs) From Pure Liquids   Background and aims: Production of fixed concentration of vapors from pure liquid has many applications in laboratory and field studies of occupational health and toxicological research and also in calibration of air pollutant measurement devices of the workplaces. In this study, the advantages and disadvantages of different concentration generation methods were discussed. In addition two selected methods were compared and the factors that influence the generated concentration were identified.   Methods: In order to make certain concentrations of styrene, evaporation and injection methods were used. In evaporation system air was blown in a 250 (ml) midget impinger in two modes (close to the liquid surface and inside the liquid). For injection system a syringe pump (3100 Graseby, Smiths Co) was used. Affecting factors on concentration stability like temperature, flow rate, position of nozzles have been investigated.   Results: To produce 300(ppm) of styrene vapor concentrations in RH=19%, coefficient of variation (C . V) of the concentrations generated in bubbler and syringe pump systems were 2.86 and 2.01 percent respectively. Syringe pump system reached to the equilibrium approximately in 60 (min), while for the evaporative systemit took 105 (min).When the nozzle of the bubbler was placed close to the liquid surface, the coefficient of variation was 1.97% , however, when it was placed inside the liquid, the C.V was 2.52% .   Conclusions: Controlling the influencing factors like temperature and flow rate are most important points for the generation of constant concentrations. The low coefficient of variation in the syringe pump system proved the better capability and functionality of this system compared to bubbler system. One advantage of the syringe pump system is that it is not dependent on liquid level of the container. http://ioh.iums.ac.ir/article-1-824-en.pdf 2014-08-22 75 87 Vapors Generation Dynamics Method Static Method Temperature Flow VOC Midget Impinger Syringe Pump AA Mofidi amirabbasmofidi@gmail.com 1 TMU AUTHOR H Asilian asilia_h@modares.ac.ir 2 TMU AUTHOR A Jonydi Jafari Jonidi@modares.ac.ir 3 TMU AUTHOR
OTHERS_CITABLE ارزیابی ایمنی در پروژه‏ های ساختمانی بر اساس روش های تحلیل سلسله مراتبی و فازی خاکستری زمینه و هدف: صنعت ساختمانی یکی از خطرناک‌ترین صنایع، با توجه به طبیعت منحصر به فرد آن است. با توسعه سریع ساخت‏و‏ساز در کشور ما، مشکلات ایمنی در کارگاه‌های ساختمانی به مشکلی جدی تبدیل شده است. بنابراین توجه به ایمنی و شناسایی شاخص‌های موثر بر آن و ارزیابی ایمنی در پروژه‌ها به منظور بهبود عملکرد ایمنی پروژه‏های ساختمانی ضروری شناخته شده است. روش بررسی: با توجه به اینکه عوامل موثر بر ایمنی کارگاه‌ها دارای ویژگی‌های فازی و عدم قطعیت است، بنابراین از تحلیل رابطه خاکستری فازی، برای مدل ارزیابی استفاده شده است. تئوری خاکستری که از مجموعه روش‌هایی تصمیم‌گیری چند‏شاخصه است، برای حل مسائلی که داده‏های گسسته، اطلاعات ناقص و مبهم دارند به کار می‌رود. همچنین وزن هر شاخص توسط فرایند تحلیل سلسله مراتبی مشخص می‌شود. در سه پروژه متفاوت ساختمانی به صورت مطالعه موردی، شاخص‌های موثر ایمنی ساخت‏و‏ساز شناسایی شده و وضعیت ایمنی در این کارگاه‌ها بررسی گردید. یافته‌ها: با توجه به نتایج، شاخص تجهیزات کافی و اقدامات پیشگیری بیشترین وزن (307/0) و کمترین وزن را علامت‏گذاری صحیح (018/0) بدست آوردند. سپس با استفاده از روش فازی خاکستری (درجه رابطه خاکستری) وضعیت موجود ایمنی در سه کارگاه ارزیابی و رتبه بندی شد که پروژه 1 از لحاظ ایمنی در سطح مطلوب‌تری قرار گرفت. نتیجه گیری: مقایسه نتایج با تحقیقات پیشین، ملاحظات تجربی و پرسش از گروه ارزیابی ریسک نشان داد که این راه حل قابل اعتماد و کارآمد است. لذا توصیه می‌شود مدیران ایمنی ضمن استفاده از این روش، از عوامل مهم شناسایی شده در این مطالعه برای کمک به ارزیابی عملکرد ایمنی و کاهش حوادث در پروژه‏های ساختمانی استفاده کنند. http://ioh.iums.ac.ir/article-1-907-fa.pdf 2014-08-22 87 98 ارزیابی ایمنی پروژه های ساختمانی فازی خاکستری تحلیل سلسله مراتبی Safety Assessment in Construction Projects Based on Analytic Hierarchy Process and Grey Fuzzy Methods   Background and aims : The construction industry is known as one of the most dangerous industries according to itsunique nature . With the rapid developmentof construction inour country, thesafety problemsatconstruction siteshave becomeaserious problem . Therefore,paying attention tosafety,identifying its effective indicators and projects’ safetyevaluation is known as an essential issue for improvingsafety performanceof construction projects .   Method: Regarding thefactors influencing sitesafetywhich have fuzzyand uncertainnature , grey fuzzy analysis has been used in evaluating model.Greytheory which is one of the multi-criteria decision-making methods is usedto solve problems with discrete, vague andincompletedata . Also Analytic Hierarchy Process (AHP) is used to determine weight of each index . Inthree different constructionprojects which are analyzed as case studies , the indicators affecting construction safety are identifiedand the site safetysetting is studied.   Results: According to theresults,enoughequipment and preventive actions index obtained the highestweight( 0.307) andthe leastweight was for proper signage(0.018 ). Then, using grey fuzzy method , the currentsafety setting in three sites is evaluated and ranked . The safety setting of project 1 wasmoreappropriate.   Conclusion : Comparing the results with the past research, experimental observations and feedback from risk assessment group demonstrate that this method is reliable and useful therefore, it is recommendedthat safetymanagersuse thismethod and also use factorsidentified in thisstudy for safety performanceassessmentand reducingconstruction projects accidents. http://ioh.iums.ac.ir/article-1-907-en.pdf 2014-08-22 87 98 Safety Evaluation Construction Projects Grey Fuzzy Theory Analytic Hierarchy Process (AHP) A Ardeshir ardeshir@aut.ac.ir 1 Amirkabir university of technology AUTHOR M Mohajeri mohajerymehdi@yahoo.com 2 Amirkabir university of technology AUTHOR M Amiri m-amiri@aut.ac.ir 3 Amirkabir university of technology AUTHOR
OTHERS_CITABLE بررسی تغییرات دانسیته ادرار به عنوان بیومارکر وضعیت دهیدراسیون در کارگران شاغل در محیط های گرم  زمینه و هدف: حین انجام فعالیت فیزیکی در محیط های کاری گرم، تعریق همراه با تبخیر به عنوان مهم ترین پاسخ فیزیولوژیک بدن افزایش می یابد که می‌تواند در نهایت منجر به دهیدراسیون (کم آبی) گردد. هدف از انجام این مطالعه بررسی تغییرات دانسیته ادرار به عنوان بیومارکر وضعیت دهیدراسیون در کارگران شاغل در محیط های گرم بود. روش بررسی: در این مطالعه مقطعی 40 نفر از کارگران شاغل در محیط های گرم بعنوان گروه مورد و 20 نفر از کارکنان اداری به عنوان گروه شاهد مورد بررسی قرار گرفتند. به منظور ارزیابی وضعیت دهیدراسیون در افراد دو گروه اندازه گیری دانسیته ادرار در ابتدا و انتهای نوبت کاری با استفاده از دستگاه سنجش دانسیته (رفرکتومتر مدل Hand Hold )انجام پذیرفت. تعیین شاخص استرس حرارتی در ایستگاه های کار با استفاده از دستگاه WBGT متر دیجیتالی ساخت شرکت Casella صورت گرفت. در نهایت داده های حاصل از این مطالعه با استفاده از آزمون های آماری مقایسه میانگین ها و کای دو توسط نرم افزار SPSS 16 مورد تحلیل قرار گرفت. یافته‌ها: میزان شاخص استرس حرارتی در اغلب ایستگاه های کاری گروه مواجهه یافته بالاتر از حد مجاز توصیه شده کشوری و در گروه شاهد پائین تر از حد مجاز قرار داشت. آزمون آماری مقایسه میانگین ها تفاوت معناداری را بین میزان دانسیته ادرار گروه مورد در ابتدا و انتهای نوبت کاری نشان داد (001/0 >p). میزان دانسیته ادرار در انتهای نوبت کاری در گروه مورد بالاتر از گروه شاهد قرار داشت که با توجه به آزمون مقایسه میانگین ها ، اختلاف مشاهده شده معنی دار بود (01/0>p  ). نتیجه گیری: میزان دانسیته ادرار توانست با لحاظ نمودن اثر عوامل مداخله گر بطور قابل قبولی بیان کننده میزان دهیدراسیون افراد در مواجهه با استرس گرمایی باشد. از این رو دانسیته ادرار ‌می تواند بعنوان یک بیومارکر قابل قبول به منظور ارزیابی مواجهه شغلی گرما در راستای تعیین ریسک بروز تنش هایی گرمایی استفاده گردد. http://ioh.iums.ac.ir/article-1-1019-fa.pdf 2014-08-22 99 110 دانسیته ادرار استرس حرارتی دهیدراسیون محیط کاری گرم Investigation of the variation ofurine densityas abiomarker of dehydrationconditionsin workers employed in hotworkplaces   Background of aims: During physical activity in hot environments , sweating along with evaporation is increased , as the most important physiological response , which can lead to dehydration . The aim of this study was to investigate the variation of urine density in dehydration conditions of workers in hot workplaces.   Methods: In this cross-sectional study , 40workers in the hot environments were selected as case group and 20 administrative staff s control group . In order to assess dehydration level of the employees, urinary density was measured at the beginning and end of shifts using hand hold model of Refract meter (density gauge device) . In order to evaluate the heat stress in work stations, heat stress index was measured using a digital WBGT meter manufactured by Casella. Ultimately, data obtained from this study were analysed using compare means and Cochran tests by SPSS 16 software.   Results: In most of workstations, heat stress index was higher than the national recommended limit while this index in the control group was lower than the mentioned limit. Based on the compare means test, the urine density of the case group at the beginning and end of their shift was statistically significantly different(p<0.001).In addition, Based on compare means test ,the urine density of the case group was significantly higher than the control group at the end of work shift (p <0.01).   Conclusion: The level of urine density with regard to the effects of confounding factors could suitably show the dehydration conditions of workers exposed to heat. Therefore ,the density of urine can be used as an acceptable biomarker for evaluating the occupational exposure to heat in order to determine the risk of inducing the heat strain. http://ioh.iums.ac.ir/article-1-1019-en.pdf 2014-08-22 99 110 Urine Density Heat Stress Dehydration Hot Workplace M Jalali 1 hamadan university medical science AUTHOR M Aliabadi MOHSEN_OHSE@YAHOO.COM 2 hamadan university medical science AUTHOR M Farhadian MOHSEN_OHSE@YAHOO.COM 3 hamadan university medical science AUTHOR SA Negahban ammirrezanegahban@yahoo.com 4 hamadan university medical science AUTHOR