Volume 5, Issue 1 And 2 (spring&summer 2008)                   ioh 2008, 5(1 And 2): 39-46 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Ahmad S, Adl J, Varmazyar S. Risk Quantitative Determination of Fire and Explosion in a Process Unit By Dow’s Fire and Explosion Index. ioh. 2008; 5 (1 and 2) :39-46
URL: http://ioh.iums.ac.ir/article-1-117-en.html
School of Public Health, Qazvin University of Medical Sciences. , moc.liamg@damhadieas
Abstract:   (10300 Views)

  Background and aims

  Fire and explosion hazards are the first and second of major hazards in process industries, respectively. This study has been done to determine fire and explosion risk severity,radius of exposure and estimating of most probable loss.


  In this quantitative study process unit has been selected with affecting parameters on  fire and explosion risk. Then, it was analyzed by DOW's fire and explosion index (F&EI). Technical data were obtained from process documents and reports, fire and explosion guideline.After calculating of DOW's index, radius of exposure determined and finally most  probable loss was estimated.


  The results showed an F&EI value of 226 for this process unit.The F&EI was extremely  high and unacceptable.Risk severity was categorized in sever class.Radius of exposure and damage factor were calculated 57 meters and 83%,respectively. As well as most probable loss was  estimated about 6.7 million dollars.


  F&EI is a proper technique for risk assessment and loss estimation of fire and  explosion in process industries.Also,It is an important index for detecting high risk and low risk   areas in an industry. At this technique, all of factors affecting on fire and explosion risk was  showed as index that is a base for judgement risk class. Finally, estimated losses could be used as  a base of fire and explosion insurance.

Full-Text [PDF 313 kb]   (4351 Downloads)    
Type of Study: Research | Subject: Micro Ergonomics
Received: 2009/06/16 | Published: 2008/04/15

Add your comments about this article : Your username or Email:

Send email to the article author

© 2020 All Rights Reserved | Iran Occupational Health

Designed & Developed by : Yektaweb