Volume 5, Issue 1 And 2 (spring&summer 2008)                   ioh 2008, 5(1 And 2): 31-38 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Ghahramani A, Adl J, Nasl Seraji J. Process Equipment Failure Mode Analysis in a Chemical Industry. ioh. 2008; 5 (1 and 2) :31-38
URL: http://ioh.iums.ac.ir/article-1-121-en.html
Faculty of Health, Uremia MedicalScience University (UMSU). , ri.ca.usmu@inamarhahG
Abstract:   (9170 Views)

  Background and aims

  Prevention of potential accidents and safety promotion in chemical processes requires systematic safety management in them. The main objective of this study was analysis of important process equipment components failure modes and effects in H2S and CO2  isolation from extracted natural gas process.


  This study was done in sweetening unit of an Iranian gas refinery. Failure Mode and Effect Analysis (FMEA) used for identification of process equipments failures.


  Totally 30 failures identified and evaluated using FMEA. P-1 blower's blade breaking and sour gas pressure control valve bearing tight moving had maximum risk Priority number (RPN), P-1 body corrosion and increasing plug lower side angle of reach DEAlevel control valve  in tower - 1 were minimum calculated RPN.


  By providing a reliable documentation system for equipment failures and  incidents recording, maintaining of basic information for later safety assessments would be  possible. Also, the probability of failures and effects could be minimized by conducting preventive maintenance.

Full-Text [PDF 322 kb]   (2540 Downloads)    
Type of Study: Research | Subject: Micro Ergonomics
Received: 2009/06/17 | Published: 2008/04/15

Add your comments about this article : Your username or Email:

Send email to the article author

© 2020 All Rights Reserved | Iran Occupational Health

Designed & Developed by : Yektaweb