Volume 19, Issue 1 (2022)
ioh 2022, 19(1): 19-38 |
Back to browse issues page
Research code: 970121160
Ethics code: 970121160
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Aghababaei Talkhonche R, Ghorbani Shahna F, Mohammadrezaei A, Farhadian M. Catalytic removal of nitrogen dioxide in the air stream by nickel and nickel- platinum supported multiwall carbon nanotube.. ioh 2022; 19 (1) : 2
URL: http://ioh.iums.ac.ir/article-1-2984-en.html
URL: http://ioh.iums.ac.ir/article-1-2984-en.html
Center of Excellence for Occupational Health and Research Center for Health Sciences, School of Public Health, Hamadan University of Medical Sciences, Hamadan, Iran. , fghorbani@umsha.ac.ir
Abstract: (2131 Views)
Introduction
Nitrogen oxides as one of the most dangerous environmental pollutant, have harmful effects on the health of people in the workplace. Today, the catalytic oxidation of nitrogen oxides is a highly efficient method for removing of this gases that has been dedicated part of researches. The aim of study was to investigate the removal efficiency of nitrogen dioxide (NO2) by nickel and nickel-platinum supported on multi-walled carbon nanotubes from air stream in the catalytic oxidation process.
Materials and Methods
In this experimental study, structural and functional specifications of the catalysts were caracterized by analysis Field Emission Scanning Electron Microscope (FE-SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and Temperature-Programmed Reduction (H2-TPR) after stabilization of nickel and nickel-platinum nanoparticles on carbon nanotube substrate. The removal efficiency of the synthesized catalysts were studied at the temperature of 250 °C, space velocities of 15000 – 20000 hr-1 and the NO2 concentrations of 3000,4000,5000 ppm.
Results
The results of FESEM and XRD analysis showed that the diameter of carbon nanotubes ranged from 11 to 18 nm and the size of crystalline nickel and platinum nanoparticle on the catalyst bed were between 10 to 50 nm. The results of catalytic removal of NO2 showed that highest efficiency was related to the condition of 250℃temperature, the concentration 3000 ppm and the space velocities 20000-15000 per hour.
Conclusion
According to the acquired results, the use of carbon nanotubes as a catalyst support is appropriate for removal of NO2 fromair stream. Bimetallic catalysts used of nickel and platinum supported on carbon nanotubes was had high efficiency and productivity in NO2 removal at various temperature, retention time, and the concentration of pollutants.
Nitrogen oxides as one of the most dangerous environmental pollutant, have harmful effects on the health of people in the workplace. Today, the catalytic oxidation of nitrogen oxides is a highly efficient method for removing of this gases that has been dedicated part of researches. The aim of study was to investigate the removal efficiency of nitrogen dioxide (NO2) by nickel and nickel-platinum supported on multi-walled carbon nanotubes from air stream in the catalytic oxidation process.
Materials and Methods
In this experimental study, structural and functional specifications of the catalysts were caracterized by analysis Field Emission Scanning Electron Microscope (FE-SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and Temperature-Programmed Reduction (H2-TPR) after stabilization of nickel and nickel-platinum nanoparticles on carbon nanotube substrate. The removal efficiency of the synthesized catalysts were studied at the temperature of 250 °C, space velocities of 15000 – 20000 hr-1 and the NO2 concentrations of 3000,4000,5000 ppm.
Results
The results of FESEM and XRD analysis showed that the diameter of carbon nanotubes ranged from 11 to 18 nm and the size of crystalline nickel and platinum nanoparticle on the catalyst bed were between 10 to 50 nm. The results of catalytic removal of NO2 showed that highest efficiency was related to the condition of 250℃temperature, the concentration 3000 ppm and the space velocities 20000-15000 per hour.
Conclusion
According to the acquired results, the use of carbon nanotubes as a catalyst support is appropriate for removal of NO2 fromair stream. Bimetallic catalysts used of nickel and platinum supported on carbon nanotubes was had high efficiency and productivity in NO2 removal at various temperature, retention time, and the concentration of pollutants.
Article number: 2
Keywords: Multi-welled Carbon Nanotube, Catalytic oxidation, Nitrogen Dioxide, Nickel nanoparticles, Platinum nanoparticles.
Type of Study: Research |
Subject:
Air pollution
Received: 2020/01/4 | Accepted: 2021/04/2 | Published: 2022/01/30
Received: 2020/01/4 | Accepted: 2021/04/2 | Published: 2022/01/30
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
